[sdiy] Cheap knob source?
Rude 66
r.lekx at chello.nl
Tue Mar 25 11:06:10 CET 2003
have you tried looking on ebay? i recently bought a whole bunch of knobs,
112 in all. these are all different sizes, about 4 or 5 of them, but the
knobs are all nice black bakelite. cost me around 50 dollars, real quality
stuff.
you might be able to find osmething similar if it's for a one-off. for a
series this might not work..
r./
----- Original Message -----
From: "patchell" <patchell at silcom.com>
To: "The Peasant" <epeasant at telusplanet.net>
Cc: "Synth-DIY list" <synth-diy at dropmix.xs4all.nl>
Sent: Tuesday, March 25, 2003 4:32 AM
Subject: Re: [sdiy] Cheap knob source?
> The knob I am currently using is the Eagle Knob I get from Mouser,
> part number450-20x0, where x determines the color of the top...these are
> not great knobs, but they aren't bad ones either (matter of opinion,
> however). In 100's they are $0.69. They are on page 723 in my catalog.
>
> My first choice of knobs is the Davies 1900H, however, but, it is
> very difficult to find at a reasonable price these days. Mouser has the
> 1900, but you don't want that one (no indicator)...used to be able to
> get these through radio shack for $0.72 each, but not any more as far as
> I know.
>
> The Peasant wrote:
>
> > Hello fellow DIYers!
> >
> > I am currently in need of about 300 small knobs, 5/8 to 3/4
> > inch diameter, with setscrews, for 1/4 inch shafts. Does
> > anybody currently have any good super-inexpensive sources
> > for something like this? I'm flexible with regards to color
> > and style. Thanks!
> >
> > Take care,
> > Doug
> > ______________________
> > The Electronic Peasant
> >
> > www.electronicpeasant.com
>
> --
> -Jim
> ------------------------------------------------
> * Visit:http://www.silcom.com/~patchell/
> *-----------------------------------------------
> * Come to the Pacific Southwest DIY Meet
> * April 12, 2003 10am-5pm
> * Santa Barbara, CA
> * http://www.silcom.com/~patchell/synthdiymeet.html
> * for details
> *-----------------------------------------------
>
>
>
More information about the Synth-diy
mailing list