[sdiy] Aztec Samples - correct address!

Michael Ruberto frankentron at hotmail.com
Thu Jun 12 18:14:11 CEST 2003


it was brought to my attention that my links weren't working - DOH!!!
thanks for the heads up!!!

here's the correct address for those last links:

http://www.sunrisecomputersolutions.com/samples/aztec_3.mp3
http://www.sunrisecomputersolutions.com/samples/aztec_3.wav   (2.99M)
http://www.sunrisecomputersolutions.com/samples/aztec.mp3  (568K)
http://www.sunrisecomputersolutions.com/samples/aztec_2.wav  (2.48M)

would you believe I used to be a webmaster? sorry about that folks.

~M


>From: "Michael Ruberto" <frankentron at hotmail.com>
>To: synth-diy at dropmix.xs4all.nl, ijfritz at earthlink.net, sbernardi at attbi.com
>Subject: Re: [sdiy] Aztec Processor Samples
>Date: Thu, 12 Jun 2003 07:24:30 -0400
>
>yes more samples! These are interesting because the first ones i sent were 
>actually from the LM3916. I forgot I had it in there. so I swapped it out 
>for the 3914 and I thought maybe my allergies were clogging my ears 
>earlier. it sounds very different! I can only imagine that because the step 
>spacing is different I am getting a different harmonic series. listen for 
>yourself...
>
http://www.sunrisecomputersolutions.com/aztec_3.mp3  (278K)
http://www.sunrisecomputersolutions.com/aztec_3.wav   (2.99M)
http://www.sunrisecomputersolutions.com/samples/aztec.mp3  (568K)

http://www.sunrisecomputersolutions.com/aztec_2.wav  (2.48M)
>
>if you compare the waveforms in an editor little difference can be seen. it 
>would be cool if someone could give me an explanation on why there is such 
>a difference in sound from one device to another.
>
>~M
>
>>From: "Michael Ruberto" <frankentron at hotmail.com>
>>To: synth-diy at dropmix.xs4all.nl, ijfritz at earthlink.net, 
>>sbernardi at attbi.com
>>Subject: [sdiy] Aztec Processor Samples
>>Date: Thu, 12 Jun 2003 06:13:38 -0400
>>
>>here's a little taste of Aztec cuisine to savor while I finish slapping 
>>this damn thing together.
>>
>>http://www.sunrisecomputersolutions.com/samples/aztec.mp3  (568K)
>>
>>http://www.sunrisecomputersolutions.com/aztec_2.wav  (2.48M)
>>
>>here's the latest:
>>
>>I am finding the current control thing I mentioned to be rather 
>>interesting and it may wind up as an external input on the finished 
>>module. Added range LED indicators. it was easy since this is an LED 
>>display chip. bit #1 and bit #10 have LEDs to help set the proper input 
>>level - VERY handy. they don't seem to have any effect on the sound. 
>>having only 10 bits gives alot of variation but when you overdrive the 
>>unit i.e. the signal is larger than the 3914's divider scale, you get 
>>another effect. flattened off peaks! open the .wav sample up in Sound 
>>Forge or a similar app. and zoom in till you see the waveshapes clearly. 
>>schematics soon, I promise!
>>
>>~M
>>
>>_________________________________________________________________
>>MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.  
>>http://join.msn.com/?page=features/virus
>>
>
>_________________________________________________________________
>The new MSN 8: advanced junk mail protection and 2 months FREE*  
>http://join.msn.com/?page=features/junkmail
>

_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.  
http://join.msn.com/?page=features/virus



More information about the Synth-diy mailing list