[sdiy] rack front rails help

[Tim Ressel]

Ah, I see. You could get yourself some angle iron and
make your own. I make mine out of oak, which was a bit
of a mistake. Oak is an open-grain wood, meaning its
full of little holes. These holes tend to make the
drill bit wander off course as you try to drill. My
cabinets are less than equally spaced as a result.
Aluminum would have been a better choice.

--tr

--- Fdi <fdi at ran.es> wrote:
> Thanks to Tim, Neil and Jeff, but I'm looking for
> the horizontal front
> rails.
> 
> If you watch the images below, the ones that have a
> "C" indent on each
> extreme
> (I think the info you sent me is for the vertical
> strips... thanks anyway)
> 
> Those pictured below are from MOTM, I'm looking for
> something similar,
> better if not so thick and with more holes, more
> general...
> 
> I can't find it nowhere. Where do you get them
> friends? How do you fix the
> modules with screws on a racky thing?
> 
> So can someone point a place to get the horizontal
> threaded strips please?
> 
> Thank you all again!
> 
> Fernando
> --
> 
> 
> 
> f
> *
> 
> 
> 
> 
> > De: Fdi <fdi at ran.es>
> > Responder a: Fdi <fdi at ran.es>
> > Fecha: Mon, 28 Jul 2003 17:41:10 -0000
> > Para: <synth-diy at dropmix.xs4all.nl>
> > Asunto: [sdiy] rack front rails help
> >
> > Dear list,
> >
> > I can't find rack front rails (the threaded metal
> strips where you attach
> > your modules using screws)
> > I can only find expensive sub-rack assemblies that
> are euro-rack oriented.
> > I will use an SKB case, wich is restricted to 5''
> deep, and put the power
> > distribution boards on the side walls.
> >
> > The strips I'm looking for are as in this photos,
> but I'd like them with
> > more holes if possible:
> > http://www.wiseguysynth.com/larry/skb/SKB_clip.jpg
> > http://www.wiseguysynth.com/larry/skb/SKB_flat.jpg
> >
> > I'd like some help to locate them in Europe
> (pref.) or USA please.
> > Many thanks in advance,
> >
> > Fernando
> 
> 
> 
> <br><br>
> Direccion.com<br>
> ________________________________________________<br>
> This
> mail was sent by Direccion.com 2.0
> 


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com