[sdiy] ad vs ti

[cris at music-service.nl]

I found the AT89C5131 and the AT89C5132 one of this uC will fit in my project i think....

  ----- Original Message ----- 
  From: cris at music-service.nl 
  To: synth-diy at dropmix.xs4all.nl 
  Sent: Monday, July 28, 2003 3:16 PM
  Subject: Re: [sdiy] ad vs ti


  i was thinking to put a USB controller in it to be able to program my synth with the PC,
  mayby a uC with a integrated USB controller.
  Cris
    ----- Original Message ----- 
    From: jbv 
    To: cris at music-service.nl 
    Cc: synth-diy at dropmix.xs4all.nl 
    Sent: Monday, July 28, 2003 3:52 PM
    Subject: Re: [sdiy] ad vs ti


      
      I was thinking to build a synth with only one DSP, SRAM, flash, 24bit 96kHz AD/DA, 4 encoders with switch, 16x4 char LCD,i don't know if is possible to manage this I/O with only one DSP and if this dsp's are capable to manage Granular synthesis..
      
    I would suggest to split tasks between a uC and a DSP : 
    - the uC would handle encoders, LCD and granulation timers 
    - the DSP would be dedicated to grains synthesis, thus allowing 
    more density / polyphony. 
    JB 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20030728/924e285d/attachment.htm>