[sdiy] where to start ?...

[Frank R. de Ruiter]

It seems that they're doing a 3rd round on the German Simplesizer projekt.
Original (German) message:
Hallo SIMPLE - FREUNDE,

Aufgrund sehr vieler Anfragen, hab ich mich entschlossen eine 3. WELLE zu
ätzen. Das Ganze läuft über mich, derweil der gute Matze dabei unschuldig
bleibt. Es wird dabei NUR geätzte Platinen, ohne BOHRUNG und SIEBDRUCK
geben. Es ist immer sehr aufwendig so etwas für kleine Serien anzuleiern.
Die Platine würde ich für 15,- EURO das Stück hergeben, zuzüglich Versand.
Netzteile sind dazu auch wieder zu haben.
Wer hier interessiert ist, bitte NUR bei mir melden. Die Lieferzeit wird in
etwa 4-5 Wochen sein. Also los!

Which means: The PCB ist without holes and printing and costs 15.- Euro
each+postage. Delivery time is about 3-4 weeks. For everyone who's
interested can contact  info at anyware-instruments.de
www.anyware-instruments.de .

Site for the projekt is http://www.sequencer.de/forumsynth/simplesizer.html


----- Original Message -----
From: "Frank R. de Ruiter" <frank.r.deruiter at wanadoo.nl>
To: <synth-diy at dropmix.xs4all.nl>
Sent: Friday, July 18, 2003 7:59 PM
Subject: Re: [sdiy] where to start ?...


> The guy who's designed/delivered the PCB's is Thomas from
> http://www.anyware-instruments.de/ (also in english) but don't
> bother him to ask for ready made PCB's, 'cause after 2 rounds he isn't
> planning to do another one.
> If one needs a PCB  there are places where they can make it for you. It is
> not that cheap but you get a proffesional quality and you don't have to
> drill all the holes yourself.
>
> ----- Original Message -----
> From: "René Schmitz" <uzs159 at uni-bonn.de>
> To: "metasonix" <metasonix at earthlink.net>
> Cc: <synth-diy at dropmix.xs4all.nl>
> Sent: Friday, July 18, 2003 11:10 AM
> Subject: Re: [sdiy] where to start ?...
>
>
> >
> >
> > metasonix wrote:
> >
> > > Jeez, that Moogulator guy has lots of energy and enthusiasm.
> > > If only he weren't so far away, I'd like to give him some
> > > board-stuffing work.
> >
> > I understand, he's just the guy who organizes the web pages. The board
> > and circuit came from somebody else. Its a joint project from some guys
> > in that forum.
> >
> > > (That synth is a bit complex for a beginner project, esp. this
> > > stuff about making your own single-sided PCB and installing
> > > loads of jumpers. He really needs to offer a premade PCB to
> > > encourage more beginners to try DIY.)
> >
> > There were. But the boards are gone now.
> >
> > Cheers,
> >   René
> >
> > --
> > uzs159 at uni-bonn.de
> > http://www.uni-bonn.de/~uzs159
> >
> >
> >
> >
>
>