[sdiy] PCB connectors

[Steve Ridley]

> I have seen more bad connections and intermittants with 
> Molex type connectors than anything else. In particular, 
> the type that slides a flat contact against one side of a 
> square pin are terrible connectors. If you are going to use 
> Molex connectors, use the type with the round pins and 
> sockets, they are FAR more reliable.

I've been using the Molex KK 0.1" pitch connectors for
years with very few problems.  A surprising amount of 
pro audio equipment uses these connectors.  There 
are white and brown versions - use the brown ones - the 
white ones are cheaper and not gold plated.  The only
problems I've encountered with these have turned out
to be the result of bad crimps or unsuitable wire...

Steve