[sdiy] Concentric pots

[Tim Parkhurst]

Anyone know of a source for reasonably priced dual concentric pots? What I
need is five or maybe ten pieces of a 100k linear, preferably in a small
size (9 to 16mm would be best). I could also use one or two 500k or 1meg
concentrics. I'm trying to throw together a basic mini sequencer for a
friend, and panel space is very limited (it's going into a bit of open space
on an Odyssey front panel). I thought I had scored some surplus units, but
they turned out to be an 800k / 200k combination. Go figure. Oh, and knobs
too (though these seem to be readily available from Digi-Key and Mouser). 

Thanks in advance.

Tim Servo
"Imagination is more important than knowledge." - Albert Einstein
 




***************************************************************************
This message is confidential.  The information contained in
this e-mail message is intended only for confidential use of the
recipient(s) named above. If the reader of this message is not the intended
recipient or an agent responsible for delivering it to the intended
recipient, you are hereby notified that you have received this document in
error and that any review, dissemination, distribution, or copying of this
message is strictly prohibited.  If you have received this communication in
error, please notify us immediately by e-mail, and delete the original
message.
***************************************************************************