[sdiy] Eagle pwr pins (was Decoupling caps?)

[Jozsef Baksay]

>Using Eagle PCB, which sounds like the software of choice for this
>group.....I can't figure out how to adjust the schematic so the
>caps "show up" for the TL082's.  There are power pins visible for the
>LM311 and the CA3140 in the linear library, so that's easy, just add them
>between these pins and ground then flip to the board and trace 'em
>up...assuming of course I can make room for them.....

Click invoke button, then click on the TL082. Select power in the popup 
window, and click OK. And place the power pins. :)

Regards

Topy