[sdiy] Servo / Hold?

[Tim Parkhurst]

Hi All,

Just a real quick idea that I wanted to bounce off the group: I was trying
to think of some sort of feedback circuitry that would act like a servo (or
a DC PLL I guess) that could compensate for the droop in a S/H capacitor. Is
this possible, or would it cause more problems than it would solve? Has
something like this been done before? Perhaps there could be a circuit in
the feedback loop that would output a voltage proportional to the amount of
change in the 'stored' voltage (and therefore compensate for the droop). Of
course, it sounds like this feedback circuit would use capacitors to store
charges and so becomes another S/H itself (which defeats the whole purpose
of the thing). Maybe it would be easier to just do it digitally... ;)

Any thoughts?

Tim Servo
"Imagination is more important than knowledge." - Albert Einstein
 




***************************************************************************
This message is confidential.  The information contained in
this e-mail message is intended only for confidential use of the
recipient(s) named above. If the reader of this message is not the intended
recipient or an agent responsible for delivering it to the intended
recipient, you are hereby notified that you have received this document in
error and that any review, dissemination, distribution, or copying of this
message is strictly prohibited.  If you have received this communication in
error, please notify us immediately by e-mail, and delete the original
message.
***************************************************************************