[sdiy] Do you know something about BassAce (303 clone)

[Dave Magnuson]

At 11:06 PM 2/3/03 -0000, Trevor Page wrote:
> I believe the outstanding quality of the documentation
>supplied with it actually makes it one of the easiest projects you'll
>ever do. The EFM projects do assume some prior electronics knowledge,
>and consequently even a relatively small project like the BassAce might
>give you more problems than something like the TB3031. 
>


Very good point.  I wouldn't recommend an EFM project to anyone without a
good understanding of synth circuits and troubleshooting.  There is
generally an error or two on a circuit board or parts list, and it can
cause some confusion.  

Also Tom doesn't provide instructions or parts to build his projects.  It's
more like a circuit board, schematic, parts list and corrections, and
perhaps a calibration procedure.  That's about it... so some prior
electronics knowledge is essential.

I can't comment on the complexity of the TB3031... but it sure looks nice :)

Dave


Resonant Frequency:
resfreq at hoohahrecords.com
http://www.hoohahrecords.com/resfreq/index.html