[sdiy] Front panel drill hole questions.. (Doepfer/AS)

[Jay Schwichtenberg]

Tim,

In your database you might mention this. I was having problems making
graphics for FracRac panels where things just weren't lining up squarely on
the panel using the edges of the panels as reference points. After an e-mail
to PAIA I got back a response saying use the holes on the panels as
reference points. It turns out they grind the edges of the panels so they
aren't all that accurate but the holes are accurately done. After trying
this I haven't had any problems I can't blame on myself.

What about the Roland modular?

Good luck.
Jay

> *****************************************
> Hey Bret!
>
> Glad to hear you're making progress on your new module. As far as
> the panel
> dimensions are concerned, yes, I'm working on a panel database. So far, I
> have drawings for VME/Eurocard, Syntheizers.com, and Blacet/PAIA Frac Rac
> panels. Soon to follow are Metasonix, Cyndustries/Modcan, MOTM and
> Digisound. I'm still looking for info on Moog, Emu and ARP modular panels
> (and any others I may have missed).
>