[sdiy] Front panel drill hole questions.. (Doepfer/AS)

[Peter Grenader]

Hey - Dieter Doepher didn't invent the 3RU high component!  There's no
blessing requiring. Dieter's/Analogue System/Analgue Solutions is 129.5 mm
high.  It works out to 5.05 inches.

As far as counting holes, it looks like A. Systems stuff places the holes
5mm in from the faceplate L/R edge and 3mm from the top/bottom edge.

Hope this helps.

- P



 Bret Truchan wrote:

> 
> Hello!
> 
> Woo hoo!  My pattern generation module is complete!  The drill holes on the
> front panel are to Doepfer specifications.  However, I was considering
> changing the holes to rectangles such that the module would also fit in
> analog systems and analog solutions cases.  The power connector would still
> be "Doepfer style", though.
> 
> Would anyone know the exact measurements of the mounting holes needed to be
> compatible with Doepfer, Analog Systems, and Analog Solutions synths?  Tim
> Servo, were you the person collecting front panel specs?  Would I be
> stepping on anyone's toes by making a module compatible with those systems?
> I've tried repeatedly to contact Doepfer to request his blessings for making
> a module that's fits exactly with Doepfer cases.  No response. :-(
> 
> 
> 
> Thanks!
> - Bret
> http://67.119.86.230/
> 
> _________________________________________________________________
> Worried about inbox overload? Get MSN Extra Storage now!
> http://join.msn.com/?PAGE=features/es
>