[sdiy] Rotary Switch Needed

[BrightBoy]

> Use a DPDT *relay* for the switching (a 10A one), and a simple SPST switch 
> for the "switching" of the relay.

Paul,

This is for a 2x10" speaker extension cabinet not the guts of a guitar amplifier
so relays won't work....

When I use the cabinet with my Mesa Boogie Mark IIC+, I want to flip the switch
to the 4ohm position (before connecting and powering up the amp)

When I use the cabinet with my Peavey Classic 30, I want to flip the switch
to the 16 ohm position (before connecting and powering up the amp)

If a suitable rotary switch isn't possible, I'll just install a terminal strip on the
bottom of the cabinet so that I can manually re-wire the configuration....

Cheers,

Jeff