[sdiy] DIY Accutronics Reverb

[The Old Crow]

  No, you need driver and receiver (op-amp) circuits to properly treat 
the springs as a transmisson line.  Here is one web reference:

http://members.tripod.com/~roymal/reverb.htm

Crow
/**/

On Thu, 11 Dec 2003, Prototek wrote:

>     I just found an Accutronics reverb tank that I took off of a Marshall
> amplifier ages ago. I would love to incorporate this into my modular set up.
> The tank simply has an RCA In and Out. I guess reverb tanks dont use power?
> I've never worked hands on with one so I'm curious.
>     I was thinking of screwing the tank inside my modular's cabinet and
> making a face plate with just one 1/4" in and one out. I figure I can plug
> RCA cables into the tank and wire them directly to the back of the
> corresponding 1/4" jacks on the face plate. Would this work?
> 
>                 Thanks,
>                 John
> 

-- 
Scott Rider
S-Squared Microsolutions LLC
/**/