[sdiy] RS300 word length

[Peter Grenader]

Don't think you can do this (alter word length)  Possibly it can...I didn't
read the manual.  Who's got time for manuals, huh?

Roger at Big City Music (where I saw this this morning) could find out
though and I'll ask him.

One thing though - the RS300 is uncapable of 'smoothing out' midi info.
This is up to the midi instrument and to a greater extent, the midi spec in
general..  In with some controller applications, this quantization will
audible.  This ain't Analogue Systems' doing though, nor will I think it
will be this module's undoing.


 phillip m gallo wrote:

> Peter,
> 
> Replied to soon,
> For the dual channel assignment to work you would have to subtract the top 7
> bits of the channel one CV prior to input into channel two.  Still, more
> often than not, the 7 bits of quantization open up a lot of configuration
> and combinational possibilities otherwise not easily achieved. 10 points for
> this module.
> 
> regards,
> p
> 
> 
> -----Original Message-----
> From: Peter Grenader [mailto:peter at buzzclick-music.com]
> Sent: Friday, August 15, 2003 2:48 PM
> To: philgallo at attglobal.net
> Cc: synth diy
> Subject: Re: [sdiy] RE: [AH] Analogue Sys. RS300 CV to Midi -
> 1stImpressions
> 
> 
> phillip m gallo wrote:
> 
>> Can you assign as single input voltage across a pair of MIDI Controller
>> Coarse and Fine message types?  For instance Breath Controller number 2
> and
>> 34 (dec)?
> 
> 
> Yes...and no.
> 
> Only one assignment per input channel.  But...you've got eight inputs.  So
> to do this, one input would used for the breath controller and the other
> would have the same input signal, but assigned to 34 instead of 2.
> 
> 
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.510 / Virus Database: 307 - Release Date: 8/14/03
> 
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.510 / Virus Database: 307 - Release Date: 8/14/03
>