[sdiy] Voayger waveform animation

[Gene Stopp]

Well it looks like the old hi-tech question - "Do we change the hardware to
match the manual, or change the manual to match the hardware?"

The waveform goes like this:

Triangle
Triangle with falling slope doing a sudden drop to the falling slope
Rising slope gets longer, falling drop gets wider, falling slope gets
smaller
Sawtooth
Sawtooth with narrow pulse blip at the peak
Rising slope into rising edge of increasingly wider pulse
No slope, just 50/50 pulse
Progressively narrower pulse
Narrow pulse (but not smaller than about 5/95 ratio)

I really should post an MP3, soon as I get the time...

- Gene



-----Original Message-----
From: john mahoney [mailto:jmahoney at gate.net]
Sent: Friday, August 01, 2003 11:45 AM
To: Gene Stopp; synth diy
Subject: Re: [sdiy] waveform animation (was Re: [sdiy] Imperfect VCO)


> .... Starts out triangle, then one slope gets longer while the
> other slope gets shorter, then a little "blip" of pulse starts to edge in,
> then the saw slope morphs into a vertical line as the pulse gets wider,
> ending up in a square....

So, the saw-square transition looks like a sawtooth being clipped?
--
john