[sdiy] Can I get an opinion here?

[patchell]

    Sounds fine to me...but what it sound like to me is you need a
different PCB program...Get yourself a copy of Protel Autotrax
(http://www.protel.com ), (not Autotrax EDA, which seems to be pretty
awful, and from a different website)...

Tim Ressel wrote:

> Hey all,
>
> I know you all are the silent type and don't really
> like to speak your mind  ;-)  But I need some help
> here. I have come into a little money here and have
> decided I can afford to have a run of PCBs done. Not
> much money, just enough for one board.
>
> So here is what I have in mind: The most needed module
> (and the hardest to hand-wire) is the VCO. I use
> WinBoard and am limited in pad count. I can get the
> expo convertor and saw oscillator part on one board.
> That would leave sig conditioning for other waveforms.
> This is kool for when you need lots of saw only
> oscillators.
>
> Specs: expo/linear in, soft/hard sync in, 0-5V saw
> out.
>
> So like, how far off base am I here?
>
> --Tim
>
> __________________________________
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo.
> http://search.yahoo.com

--
 -Jim
------------------------------------------------
* Visit:http://www.silcom.com/~patchell/
*-----------------------------------------------