AW: [sdiy] PolyKorg Clone update (2)

[Ullrich Peter]

Hi!

>> Great idea to number the boards!
>> I was just about  to loose track when watching
>> this gigantic project grow.  ;-)
>
>My greatest fear was that one day I would plug a board into the
>wrong position and blow up everything, so I had to to
>something to prevent it. (;->)

There are some bus connectors and also extension to standard bus
connectors available that had little noses that could be broken
out of the row. On the other connector on the backplane the 
inverse noses had to be broken out. With that system it was not 
possible to plug into a wrong position.

Ciao
Peter

        \|/
       (o o)
--oOOO--(_)--OOOo------------------------------------------------------
                   Ing. Peter Ullrich   mailto:peter.ullrich at kapsch.net
                   Homepage: www.ullrich.at.tt , http://come.to/ullrich
                   As of 1st of February there are new numbers:
                   Phone: +43 (0)50 811 2265   Fax: +43 (0)-50 811 2209
                   eFax:  +43 (0)50 811 992265
   .oooO           Hardware & Software Developer /  Electronic Musician
   (   )   Oooo.   Kapsch TrafficCom AG                 Vienna / Austria
    \ (    (   )   http://www.kapsch-trafficcom.com/
-----\_)----) /--------------------------------------------------------
           (_/

This e-mail and any attachment and the included information are confidential,
protected by copyright and intended solely for the use of the named
recipient(s). If you are not the named recipient any disclosure, copying,
distribution or retention of this e-mail is prohibited and may be unlawful. If
you are not the intended recipient, please inform us immediately, delete this
e-mail and all attachments from your system, and refrain from taking any other
action in reliance to this e-mail.