[sdiy] SW DIY Convocation explanations...

[Peter Grenader]

Cool pictures! Thanks, Jimbo.

Next time --> BEER.

Hey listen, I just want to mention that the Roland 100, Analogue Systems
rack and Analogue Solutions Vostok on my table were all provided on loan for
the day from Roger Cordell at Big City Music.  So, yey to Rog.

And while some of you have asked me privately, the module sitting on top of
my expansion rack is my new Buchla 258 oscillator clone using Mark Verbos'
PCB art. The white-faced module sitting in front of the expansion rack,
which was providing all sorts of intertesting patterns earlier in the day
and is possibly the world's most eclectic frequency divider is a prototype
Blacet Binary Zone, also supplied or the day by JB himself.

Thanks, guys!

OK, so I couldn't help it...When I got home I plugged in the Roland and gave
it a test drive and I gotta say, I lov the sound of that filter.  I nbotice
there is a fixed frequency high band combined with the low pass and while I
must admit, didn't have that time to tear into it, nor to fully understand
how it's configured, I dug the sound.


Peter

Jim,
> 
> If i chiseled the pix in stone i could have probably posted these images
> faster. Anyway i have posted so pix from Saturday (thanks again for a good
> time) @ http://www.geocities.com/phillipmgallo/SWDIY.html  This is a
> GEOCITIES site, and they don't hand out a lot of bandwidth for free so if it
> says the site is busy try a bit later as i just uploaded these files.
> 
> regards,
> p