[sdiy] way OT - need tek tm506 help

[Ted Slominski]

figured it out.... it jumps the top row incase anyone was wondering

On Friday, April 11, 2003, at 02:14  PM, mostaware at mac.com wrote:

> Just received a tek tm506 from UPS and can tell that they didn't take 
> too much care in shipping it.  there is a jumper that popped off in 
> shipping and i'm not sure where it goes.   there is a bank of 4 sets 
> of 4-pin  jumpers looking like this (x = pin):
>
>          x        x         x        x
> RED   220v     BROWN   120v
>
>          x        x         x        x
>
>          x        x         x        x
>
>          x        x         x        x
>
> This is looking from the back of the machine to the interconnect board 
> with the top off.  jumpers are located in the top-right side of 
> interconnect.
>
> the jumper that fell off is red (perhaps 220v jumper)  and jumps the 
> two outside pins (1&4?).  The second row is jumped with a brown jumper 
> jumping pins 1 to 2, 3 to 4 like such:
>
>          x        x         x        x
> RED   220v     BROWN   120v
>          x ----x        x---- x
>
>          x        x         x        x
>
>          x        x         x        x
>
> does the brown jumper set the power in the second row?  more 
> importantly, where did the red jumper come from?
>
> thanks,
> -ted
>