[sdiy] potentiomenter sources

[John L Marshall]

I use them as well. Shaft length is good. Small knobs still cover the nut.


Take care,
John
www.sound-photo.com
---------------------------------------------------------------------------

----- Original Message ----- 
From: "patchell" <patchell at silcom.com>
To: "The Peasant" <epeasant at telusplanet.net>
Cc: <synth-diy at dropmix.xs4all.nl>
Sent: Saturday, April 05, 2003 9:18 PM
Subject: Re: [sdiy] potentiomenter sources


>     I like the Xicon pots you get from mouser....they are real cheap...a
> bit less than a dollar each, but the bushing is metric, and comes out to
> about 5/16" instead of 3/8", but the shaft is 1/4"....
> 
> The Peasant wrote:
> 
> > Hello everyone,
> >
> > I seem to have come up a bit short on 10K and 50K pots for
> > my drum synth project. Does anyone have any good sources
> > for inexpensive pots these days?
> >
> > Take care,
> > Doug
> > ______________________
> > The Electronic Peasant
> >
> > www.electronicpeasant.com
> 
> --
>  -Jim
> ------------------------------------------------
> * Visit:http://www.silcom.com/~patchell/
> *-----------------------------------------------
> * Come to the Pacific Southwest DIY Meet
> * April 12, 2003 10am-5pm
> * Santa Barbara, CA
> * http://www.silcom.com/~patchell/synthdiymeet.html
> * for details
> *-----------------------------------------------
> 
>