[sdiy] building from schematics.....

[harrybissell]

Hey Tom

http://www.vectorelect.com/img/PDF/Pages%2069-70.PDF

They're out there. I recommend you buy the  1000 pc. package at one
time...they go fast.  But after you change the same resistor value for the tenth
time and the board is STILL good, you will be paid in full !!!

H^) harry


Tom Arnold wrote:

> On Tue, Sep 17, 2002 at 04:42:52PM -0700, patchell wrote:
> >     I have build a lot of synth modules using plain old garden variety Vector Perf board (with 0.042" holes,
> > 0.100" grid) and Vector T42-1 Terminals.  Takes a bit of practice to get a technique down, but I have built some
> > pretty big boards using this methode.
> >
>
> Ok. I'm gonna get whapped with a 2x4 for this one... but... I've actually
> tried to find Vector T42 terminals so I could try this method of prototyping
> and havent had any luck.  Anyone have an online Mouser/Digikey/someone
> picture of a T42 so I know what I'm looking for?
>
> This may be easier then my current method of laying out a board real quick-like
> and etching it.  That and no more brown hands after etching :-)
>
> --
>  ------------------------------------------------------------------------
>  - Tom Arnold -       When I was small, I was in love,                  -
>  - Sysabend   -       In love with everything.                          -
>  - CareTaker  -       And now there's only you...                       -
>  --------------         -- Thomas Dolby, "Cloudburst At Shingle Street" -