[sdiy] Oberheim OB-Mx PSU question

[Tony Allgood]

Hi Seb and all,

OK, that plate near the actual inlet socket aperture is removable
without too much force. I actually can't remember how its actually
removed, but it took me only seconds to work out how to do it with the
unit in front of me. [Now if it were very hard to get off I would have
remembered this all in detail :-) ]

There is a little switch underneath that simply selects between either
110 or 230V. The new voltage setting will appear in the window once the
plate goes back. And its not paper but a white piece of printed plastic
and part of the switch itself.

Also change the fuse inside to half the original US fitted value... I
think you'll need a 250mA from memory.

Regards,

Tony Allgood                       Penrith, Cumbria, England

Oakley Sound Systems                   www.oakleysound.co.uk
Modular projects            www.oakleysound.com/projects.htm