[sdiy] ca3280e in germany?

[René Schmitz]

Hi all,

I think that was Jürgen if I recall correctly. 
However, also remember haveing seen a linearising circuit for the 3080 
which employed a 3046. Basically the same circuit as in the BA6110, diodes 
driven by a current source. So I guess the same thing could be done to a 
13x00 too, just that the diodes are the other way round so the Isource 
needs to go to V+ instead of GND.

Cheers,
 René

At 14:09 15.11.02 -0700, Ian Fritz wrote:
>Serge suggested using larger input resistors connected to the  - supply 
>(instead of ground). If I remember, somebody here tried that once but 
>didn't see an improvement.
>
>At 06:41 PM 11/14/2002, Paul Perry wrote:
>
>> >level (and using the standard 500R input resistance scheme).  Distortion is
>> >due to the inputs not being true current sources.  The 3280's design is
>> >just plain better for distortion.
>> >
>>Would it help if the LM13700 was driven by an external current source?
>>
>>paul perry Melbourne Australia
>
>
-- 
uzs159 at uni-bonn.de
http://www.uni-bonn.de/~uzs159