[sdiy] Project Recommendations

[patchell]

    I would stay away from the CEM chips...well, not all of them.  But, because some of them are "rare", which probably means that the one you need is expensive, things could get pricey...

    Sound to me like a kit would be more in order...and since you say $150, sounds to me that a Paia Fatman would fit the bill....quite a few list members have built them, so, after you get yours finished, they can supply you with pleanty of mods you can make to enhance it even further.  It's a good way to get your feet wet.

    If you are willing to go a little slower, consider Blacet, Motm, etc modules.  Build them one at a time.  If you keep it up, you will eventually have quite a system...

Nihil Chimeraea wrote:

> Hey. I think I've decided that the ASM-1 might be a little bit ambitious as a first synth to build, and so am trying to find a new project to attempt. Here's what I'm looking for in a DIY synth right now... I'm gonna guess there probably won't be a project that fulfills all of there qualifications, but hopefully someone will be able to suggest something that fulfills the majority of them.
>
> -Ideally, something with at least two oscillaters and at least an LP filter and a pair of EGs.
> -Something that will be a useful instrument, in addition to being a good project to learn with. This one's an important one.
> -Ideally under 150$ or so, excluding the case, which I' reasonably convident I can manage to construct out of thick sheet metal for little expense. I'm kind of strapped for cash, so cheaper is better. If there's nothing decent that can be built under this limit, then go ahead and recommend something a bit less economical, though.
> -Hopefully something where I can find the entire synth's schematics/instructions in one place. I'd prefer not to have to attempt to patch together disparete oscillaters, filters, etc. until I'm a little more experienced.
>
> Something using the CEM chips (that are apparently still available from synthtech.com) looked like a decent way to go for a beginner since they save a lot of the complexity, but don't consider this at all to be a requirement if you're planning on recommending a project, just an observation. How hard would it be to built something entirely (or almost entirely) out of these kind of chips?
>
> Thanks in advance.
>
> ------------------------------------------------------------
> community resource - http://www.toronto-goth.com
> 4 new contests - http://contests.toronto-goth.com
>
> ---------------------------------------------------------------------
> Express yourself with a super cool email address from BigMailBox.com.
> Hundreds of choices. It's free!
> http://www.bigmailbox.com
> ---------------------------------------------------------------------

--
 -Jim
------------------------------------------------
* Visit:http://www.silcom.com/~patchell/
*-----------------------------------------------
*I'm sure glad Merry Christmas comes just once a year
* -Yogi Yorgensen
------------------------------------------------