[sdiy] Site update: MIDI3CV interface

[m.bareille at free.fr]

Hello 

I have upgraded my web page with informations of my last project 

It is a small MIDI to CV interface based on PIC16F84 and named "MIDI3CV".
Basicaly developped for the ASM1-X (V/oct) to replace a defficient MCV ( 
elektor)i have rapidly adapted it for Korgs MS series (general request around 
me) and finaly,as i was in need of an easy tuning system for the tube synth i 
am building,it became the "thing" presented on my web page now...

Small but powerful, here is a quick resume of features :

The MIDI3CV interface is a MIDI to 3x CV + Gate converter for monophonic
analog synthesizers. Based on a PIC16F84 and three 8 bits converters it
perform a 100% editable 4 oct scale, to driveV/Hz (Korg MS20) or any other
unlinear devices like Thyratrons tube VCOs. It also produce the 1V/oct scale
for linear synthesizers. Gate outputs are +, - and switched trigger for Moogs.

Complete MIDI system exclusive message is implemented to edit all
parameters and tune each note of the table. A configuration software for
Windows is provided to configure the interface through MIDI.  


Much more informations are available at :

http://m.bareille.free.fr/


Best Regards,


Marc B.