[sdiy] OT- cleaning off serial number...

Barry L. Klein Barry.L.Klein at wdc.com
Thu Jun 27 00:19:31 CEST 2002

Along these lines.... I accidentally wiped a cleaning rag
across my Memorymoog's serial number - written in Sharpie
ink... Any trick to determine what was originally there -
as its totally gone now...


-----Original Message-----
From: tpaddock at seanet.com [mailto:tpaddock at seanet.com]
Sent: Wednesday, June 26, 2002 6:42 AM
To: synth-diy at dropmix.xs4all.nl
Subject: [sdiy] OT- repair clear plastic knob

I just got a signal generator and I was 
taking the knobs off to clean under them. 
Everything was fine till I had the thought: 
"I gotta be careful, this knob might break if I drop 
it on the hard floor. That would be a bummer."

It's the clear plastic dial-skirt-bezel-thing that's 
cracked. No missing pieces, just a crack, just a big 
nasty ugly crack. Here's one just like it on ebay. 
You can see what the knobs look like.

Or search for item 1361497056

I'd like to fill the crack with something so light 
doesn't reflect off it and it won't be so visible. 
Doesn't have to be strong. 
I can use a vacuum chamber if that helps.

The good news is that it works. Freq range is 
1mHz-1.999999999MHz, so I thought it would make a 
good LFO, tuning standard, and ring mod carrier.

Toby Paddock

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20020626/9bd6f0ed/attachment.html>

More information about the Synth-diy mailing list