[sdiy] digital oscope kit

[Jay Schwichtenberg]

Dan,

IMHO this would only be good enought for real low end work. Nothing serious,
especially in the analog relm. I'd save my money and look for a used analog
scope. Check out e-bay for an old Tek or HP scope that has been
refurbished/calibrated recently. I scored big time and got a 100 mHz B&K
dual channel for $90. I'm pretty bigited about digital scopes and don't like
to use even good ones on audio. Most are 8 bits, some are getting into the
10 bit range. So when you're doing signal to noise or dynamic range
measurements you don't have a lot to work with.

Thanks for the soap box.
Jay