[sdiy] My PSU...

[epeasant at telusplanet.net]

> >Next it says I need a "max current/fuse rating" of .75A,
> 
> >so where does that go in the overall circuit from my
> outlet to 
> >xformer?...
> 
> You need to put the fuses in line at the output of the
> power supply. Put one
> in the +out line and another in the -out line.
> 
Just to clarify here, if wiring power in Europe both power 
leads require fuses, but in North America this is illegal, 
you fuse ONLY the "HOT" wire. In North America the ground 
is at the same potential as the neutral wire, but in Europe 
ground is midway between each line.

Take care,
Doug
______________________
The Electronic Peasant

www.electronicpeasant.com