[sdiy] Juno 106 keyboard disassembly? Cross posted

[adam at hoodmusic.net]

Hi
    The Juno keyboards, and every Roland keyboard I have poked around in work
pretty much the same way. Once you get everything exposed you got a few screws
under the keyboard assembly that go through from the bottom, take those out
and disconnect the connector going to the keyboard assembly and the whole
thing should lift right out. Then take a peek at the bottom of the assembly,
each key works by a thin piece of metal that shorts to the bus wire when a key
is depressed.. these are normally the problem when keys do not work. Look to
see if any are bent, if they are bend them back nice and straight and all
should be good.

adam

ElmacacoX at aol.com wrote:

> Hi lists ;)
>
> I have a Juno 106 here with two iffy keys,  I took the thing apart, but for
> the life of me I can't figure out how to get at the key contacts.
>
> someone toss me a line here please ;)
>
> Thanks
>
> Eduardo