[sdiy] Help! Fatman problems!

[Moho Disco]

Funny, I had this exact same problem when I turned my
Fatman on...  and I haven't gotten around to trying to fix
it yet either, so if anybody knows the answer...

Lava

At 09:56 PM 1/18/2002 +0000, John Goodall wrote:
>Hi everyone,
>
>I've just plugged in my Paia Fatman having finished construction of it to
>discover it doesn't work :0(
>(It was to be expected really, it's the 1st synth I've built)
>
>Here's the problem. When I strike a key I get a very short noise coming out
>but it's very brief and to my electronically untrained ear sounds like it
>could be a really low bass note, maybe just 1 cycle of the waveform(?).
>
>Playing a higher or lower note on the keyboard makes no noticeable
>difference to the pitch, neither does changing any of the 5 trimmer
>resistors or the pitch control on the front.
>
>The 1800 ohm resistor that bridges R34(1) & R34(3) was missing from the kit
>so I ordered one from RS, it's the same value but states it is 1% (R5%).
>I've also used a blue led for the power light, I know these use slightly
>more current but that couldn't be the problem could it..?
>
>Please can someone help me? It would be great if you could advise me in
>simple terms, I am a total novice!
>
>Many thanks, John
>
>
>Visit our website at http://www.rm.com
>
>Standard Disclaimer:This message is confidential.  You should not copy it or
>disclose its contents to anyone.  You may use and apply the information only
>for the intended purpose.  Internet communications are not secure and
>therefore RM does not accept legal responsibility for the contents of this
>message.  Any views or opinions presented are only those of the author and
>not those of RM.  If this email has come to you in error please delete it
>and any attachments.  Please note that RM may intercept incoming and
>outgoing e-mail communications.