[sdiy] TR909 clone PCB pictures

[Brian]

I've found that my scanner does a nice job as well...Brian

-----Original Message-----
From: owner-synth-diy at dropmix.xs4all.nl
[mailto:owner-synth-diy at dropmix.xs4all.nl]On Behalf Of J. Larry Hendry
Sent: Monday, January 07, 2002 7:20 PM
To: synth diy
Subject: Re: [sdiy] TR909 clone PCB pictures


I have had the best luck getting rid of flash completely.  I have found that
the tripod, and long exposure times coupled with as much diffused light
yields the best photos of circuit boards.  Here is a sample of the results I
get without flash:
http://www.wiseguysynth.com/larry/mw2090/2090_07.jpg
You have no trouble reading the resistor color codes or PCB screen. Looked a
little better before I turned up the jpg compression.
Larry H


----- Original Message -----
From: patchell <patchell at silcom.com>
As far as the pictures, they look just as good as any of the ones I have
ever taken with a flash.  One of these days I will figure out how to get rid
of
the glare.  If I want to take a good picture, or I should say, a better than
normal one, I take the board outside and photograph it in the sun light.
The
shade is best....you just need to make sure the exposure is set right.