[sdiy] my new MIDI to DCB Convertor Page...

[Kevin Peek]

Right now I am trying to capture the DCB output in binary or hex.
Then I can "decode" the output as to what function is being done on
the JUNO. This way I can then translate the input from MIDI.

I am having trouble figuring out the voltage. I am not sure as to
the output of the DCB is in terms of "mA" and Volts.

I'll work on it this weekend!!

As always, everyone's input is appreciated!!!!

Thanks!!
----- Original Message -----
From: Per Mattsson <per.mattsson at mkv.mh.se>
To: <p8051 at yahoo.com>; <kpeek1 at prodigy.net>
Sent: Saturday, February 23, 2002 5:06 AM
Subject: Re(2): [sdiy] my new MIDI to DCB Convertor Page...


> HI!
>
> I missed the message below:
>
> p8051 at yahoo.com skriver:
> >All that's good and all, but personally, I'd like to
> >see the simplest circuit/code possible to midi a
> >juno-60. JP8-s aren't all that common, but juno60s are
> >all over the place
> .
>
> True. I'm univ. lecturer and I haunt my students if they have missed a
thing like
> the analogue lines in the DCB "standard" in a description of something,
just like
> the DCB description  Kevin does.  It a work thing and I really try to get
away
> from it :)
>
> >If simple meant no bidirectional
> >capability, I think that'd be better.
>
> I can't remember if the arpeggios of the J60 are sent over DCB but if they
are
> then that might a reason alone to get DCB->MIDI aswell.
>
>
>
> file://have a nice weekend!    Per
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20020223/a3c314bf/attachment.htm>