[sdiy] FS: front panels: multiladder,oms-410,Blacet vcadsr

[Jeffrey Pontius]

I have 'upgraded' 3 of my modular front panels, so I have the 3 previous
panels for sale.  These are designed to fit Synth Tech (motm) 19" rack
rails, made by Schaeffer, 2.5mm thick (less than the standard motm front
panels - one reason I had new panels made), black finish with white
lettering, holes made to fit Oakley (multiladder, oms-410) Omeg pots or
Bourns pots (vcadsr), Switchcraft 112A 1/4" sockets, NKK switch (vcadsr),
e-Switch pushbutton (vcadsr), and Lumex leds (vcadsr) [see
http://www.hotrodmotm.com/parts_list.htm for some details on these parts].
No pot tick markings.

Panels can be viewed at
http://www-personal.ksu.edu/~jpont/synths/studio.pic.html#modular
although, because of my poor photo skills, only the Blacet vcadsr is
really informative.

Layout basically follows motm style.  Some specifics:
(1) Multiladder - basically follows the layout and labeling displayed at
http://www.oakleysound.com/ladder.htm as [top to bottom, j=jack socket]
in1		frequency
in2		resonance/feedback
in3		v/oct
jin1 jfeedback	freq cv
jin2 j1v/oct j1 pole j2 pole
jin3 jfreq cv j3 pole j4 pole
Asking $16 which would include USPS shipping in USA.

(2) OMS-410 companion to motm 410 filter:
Layout is the same as Tony's photo at
http://www.oakleysound.com/oms-410.htm except some labels are slightly
different.  One edge nick (barely noticable) on the panel edge left of bp
cv 2 pot.
Asking $12, including USA shipping.

(3) Blacet EG1 vcadsr:
output level		 attack
time base		 decay
time base led
	NKK switch	 sustain
jtime base
jgate	gate-pushbutton	 release
jattack jdecay  jsustain jrelease
env.-led jout + jout -   jlevel out+
Second and up jack socket rows are slightly off (a few mm) from the motm
layout.
Asking $18, including USA shipping

Any questions, please e-mail me, thanks, Jeff