[sdiy] PCBs from image?

[Mathias Märker]

Hi,

try http://www.mikes-elektronikseite.de/

Regards,
Mathias

----------------------
ML-303 DIY Project
www.acidcode.de
----------------------

----- Original Message -----
From: "prototek" <prototek at optonline.net>
To: <fdi at ran.es>; <synth-diy at dropmix.xs4all.nl>
Sent: Sunday, December 01, 2002 3:03 AM
Subject: Re: [sdiy] PCBs from image?


>     I would really like to know if this is possible too so please post to
> SDIY if anyone knows if this is possible.
>
>                     Thanks,
>                     John
>
>
> on 11/30/02 7:40 PM, Fernando de Izuzquiza at fdi at ran.es wrote:
>
> >
> > Hi all,
> > I would like to find someone in Europe (or even USA) that can make PCBs
(one
> > side, drilled, no
> > legend) from image files (or transparent print of the image, of course).
> > 15 years ago it was possible here in Barcelona, but now they ask me for
the
> > GERBER file (I imagine
> > this is a vectorial description file or so). Even if any of the free
software
> > available on the net
> > can save as GERBER file, some of my PCB drawings are too complicate to
be
> > copied trace by trace.
> >
> > So can you point me to someone that still works the old way? Any other
tip or
> > advise?
> >
> > Many thanks in advance!
> > Fernando
> >
> >
> > f
> > *
> >
> >
>