[sdiy] Synth-DIY breadboard Module...

[epeasant at telusplanet.net]

Here is one of Harry's worst nightmares:

www.angelfire.com/electronic/epeasant/images/breadbox.jpg

and inside:

www.angelfire.com/electronic/epeasant/images/breadin.jpg

I built it in 1992 from mostly salvage parts (including 
case), has adjustable bipolar and fixed 5 volts power 
supply, 555 based audio oscillator, BNC connectors for 
signals and banana posts for other connections. 4 patchable 
toggle switches complete the unit. When I need a pot, I 
simply insert a trimpot where needed. It has served me well.

Take care,
Doug
______________________
The Electronic Peasant

www.electronicpeasant.com

>     Maybe Harry shouldn't read this ;^) .... in involves
> solderless plug
> strips...
> 
>     I modified my solderless plug strip today (something
> I built from
> off the shelf plug strips about 20 years ago).  One
> problem with the
> plug strip is that it is difficult to interface with
> anything.
> 
>     I mounted a 1" x 1" aluminum angle on the base board,
> and drilled
> holes for 2 pots and 7 1/4" jacks...although, after I
> finished putting
> the last jack in the thing, I realized I should have
> included some
> banana jacks as well (I use both...guess that makes me
> schizophrenic...).
> 
>     Anyway, looks like it will be a lot easier to quickly
> build
> something up and give it a test.
> 
> --
>  -Jim
> ------------------------------------------------
> * Visit:http://www.silcom.com/~patchell/
> *-----------------------------------------------
> *I'm sure glad Merry Christmas comes just once a year
> * -Yogi Yorgensen
> ------------------------------------------------
> 
> 
>