[sdiy] Synth-DIY breadboard Module...

[Scott Gravenhorst]

harry <harrybissell at prodigy.net> wrote:
[...]
>So bless those who have success with whatever technique they like...but
>don't cry
>to me about your solderless breadboard problems  (i told you so  ;^)
>
>H^) harry   (hard-wired harry)

I've had the opposite experience.  I've used these for years, the same
set of 3, actually, at one time I had a 4 voice uC controlled synth on it
working perfectly.  All TTL.  I've built VCOs, VCFs, waveshapers and you
name it.  Stuff that didn't work was my fault, crap design most often.  I
usually figure out why.  So I like 'em.  I've recorded tracks using
equipment built on a SBB.  There's stripboard laid out like a SBB brick,
so the circuit is easy to move to that medium.

I may not do BBDs, but I do SBBs.

=========================================================  
- What good are laws that only lawyers understand?
- Government: The other religion.
- The media's credibility should always be questioned.
- Lambs who lie down with lions are lunch.

-- Scott Gravenhorst | LegoManiac / Lego Trains / RIS 1.5
-- Linux Rex         | RedWebMail by RedStarWare
-- FatMan: home1.GTE.NET/res0658s/FatMan/
-- NonFatMan: home1.GTE.NET/res0658s/electronics/