[sdiy] Sequential Conundrum (no, that's not a type of drum machine)
greg montalbano
greg.montalbano at ucop.edu
Thu Aug 1 20:44:20 CEST 2002
At 02:30 PM 8/1/02 -0400, Crow wrote:
> Here is a thing to try that I've found to be the root of problems with 3
>different P-600s:
>
> Replace the flexible 'spectra-strip' cables that go from the CPU board
>to the voice board. These things can break internally and cause all kinds
>of subtle as well as gross malfunctions. If you have removed the boards
>several times or flipped one over on top of the other during
>troubleshooting, it is very possible one or more strip wires are now
>fractured.
>
> I replaced them with vertical headers and short ribbon cable/pin/housing
>assemblies. Now, to remove a board one just unplugs the cables from the
>headers. So much easier...
>
>Crow
>/**/
That's something I've been considering for a while -- guess I finally have
the incentive to do it. Thanks.
PS I also wanted to tell the list how WELL your pencil-eraser
keyboard-cleaning process works -- when I first got this puppy, fewer than
ten keys produced a response; and alcohol only worked so-so. But one
eraser & about 15 minutes, and the flippin' keyboard is like new.
Thanks, and thanks.
~GMM
More information about the Synth-diy
mailing list