[sdiy] Debouncing Switches

[Rhen, Kris]

Say I had a switch that I wanted to act as a manual gate to let through a
signal such as audio or even a constant voltage at the input.  As-in, when
the switch is on, the input is passed to the output.  When it is off, the
input is not.  How can you debounce this (and would you need to - I'm
guessing YES :-)?  I'd like to make two types of manual gates, one with
ON/OFF pressable buttons and one with ON-WHILE-PRESSED buttons and am
worried about bounce.  Thanks all
KRIS
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20020425/0abdda0b/attachment.htm>