[sdiy] identify this part..please?

[Joe Kramer]

Dear Ruud,
    On a capacitor "105"  usually denotes 1uF.

Regards,
Joe Kramer

Rude 66 wrote:

> good evening ladies and gentlemen,
>
> first the introduction: some of you may know me from AH, for more detailed
> info see my homepage. i make electro, use mainly analogue synths and am
> starting to get into diy-ing via modifying speak & spells, small drum
> mahcines and toys.
>
> now the question. i have a kawai 100f, which is known to have a quirky
> gv/gate configuration. i borrowed another one from a friend, which is
> modified for standard cv/gate in. so i'm basically trying to
> reverse-engineer what is done here. the oscillator not only responds to
> cv/gate now, but the filter scaling does too.
>
> i've identiefied most parts (an lm741, tl071, some resistors , switches and
> capacitors) but there are 2 capacitors i can't identify. they're small
> orange ones, 2 poles, and all they have written on them is 105L if i see it
> correctly. can anyone tell me what these are?
>
> i'm trying to figure out what's what here, i believe if memory serves right
> the 100f's cv is backwards, and its gate is s-trigger. there's 2 small
> breadboards inside with a chip on each, maybe one is a trigger converter and
> one a cv-converter. there are also 2 small trimpots inside, and a pot for
> the cv-scale and one for the filter scale on the outside. i wouldn't
> necessarily have to have the filter mod, but if i can't figure out what's
> what, i'll try to copy the whole thing wire-by-wire..;-)
>
> anyway, any help is appreciated. it would be nice to use the 100f as
> anything other than an effect machine..
>
> ruud
>
> www.bunker-records.com/rude66