[sdiy] Korg 2069 AD Revisited
Peter Snow
psnow at magma.ca
Wed Apr 10 02:37:03 CEST 2002
Hi Duane,
I have a Korg EX800 which is the expander box for the Poly800. However this thing runs off a 9V
wallwart so I am not sure if it uses the same voltages as the other synths you mention. If you send
me the pinout of the 2069, I will try measuring at least the supply voltage. I *could* simply
back-track from the chip to the power supply but all the important traces are on the bottom of the
circuit board and I do not really have time to take it apart.
Cheers,
Peter
Duane R Balvage wrote:
>
> Hello, all -
>
> Anyone happen to know the voltage ratings for the supplies / CVs for the Korg 2069AD?
>
> (it's a one chip analog audio processor used in the Korg Poly800, DW 6000/8000, Poly
> 61(?),
> and DSS-1 - it houses a cv controlled 2 input mixer, a 12/24db/oct filter with log &
> linear
> CVs, and a VCA with log/lin CVs.)
>
> I assume that it runs on +-15v PS, and the CVs are 0-5v (assuming multiplexed CPU
> control in a keyboard...)
>
> I have the pinout, I just need the supply and CV specs... if anyone has them it would be
> GREATLY
> appreciated if you could let me know...
>
> OR if you have a DW-6/8000, you could measure it for me??? :)
>
> -Duane
>
> --
>
>
>
> "The IQ and the life expectancy of the average American recently
> passed each other going in the opposite direction."
> -George Carlin
> ________________________________
> / o o oo o ooo o /\
> -------------/ //// Duane R. Balvage //// / /---------
> / _________________________ / /
> / // / // /// // /// // /// / / / /
> /___ //////////////////////////_/ /
> \____\________________________\_\/
>
> Intel Corporation, RA2-455
> Portland Technology Development
> =========================================================
>
> Phone: (503) 613-8055 FAX: (503) 613-6143
> E-Mail: dbalvage at ptdcs2.ra.intel.com
More information about the Synth-diy
mailing list