[sdiy] technics 1200 - backwards

[mark verbos]

I've heard of this with a shot glass, but maybe that's just because of 
the circles I'm hanging in. ;)

mark

media.nai at rcn.com wrote:

>A less invasive, and perhaps easier way, is to build a raised platform (a
>slice of cardboard shipping tube works), flip the headshell upside down,
>and play the bottom of the evelated record.
>
>I've seen people do this, and it works.
>
>>to make a 1200 spin backwards, remove the cover, underneath the
>>platter: find IC101 (AN6675) which has a heat-sink on top of it.
>>
>>wire up pin #8, through a SPST switch, to ground. (a good ground happens
>>to be the jumper, next to pins 12-13 of IC101)
>>
>>if the switch is open, the platter spins forward, as normal. if the switch
>>is closed (and pin #8 is grounded), the platter spins backwards.
>>
>
>
>