[sdiy] parts time

[Paul Maddox]

Dear all,

 Im trying to find some parts for a friend with a broken SDS9...

he needs a TC 5517 (though he'd like a couple)
and also one of the front panel pots, 100k lin, but PCB mounted with these
specs,

1. diameter of the metal body =  16 mm
2. height of the metal body =   9 mm
3. diameter of the plastic shaft =   4 mm
4. D-dimension ("diameter") of the shaft = 3 mm
5. total height of the shaft from the bottom -- including the screw part =
16 mm
6. the height of the screw part  =   4 mm
7. the screw = M6 = 6 mm in diameter
8. Spacing between the pins = 5 mm, from pin 1 to 3 = 10 mm
9. Pin length (vertical) = 10 mm

Again hed like a few spares..
he's willing to pay for them (well I'll buy them and he'll pay me back)...

Any help would be much appreciated.

Paul Maddox
_______________________________________
Wavesynth home page;-
    Http://www.wavesynth.com
Modulus synthesizers home page;-
    Http://www.modulus.wavesynth.com
PPG Synthesizer pages;-
    Http://www.PPG.wavesynth.com
Waveterm C Project page;-
    Http://www.waveterm.com