[sdiy] multiples

[John Blacet]

Just connect the jacks together. No magic here at all, except ------you
might use the switch on the jack to connect *groups* of jacks together
*unless* a plug is in the jack, which separates that group from the
rest. For more info on this see the multiple on the motm site:

http://www.synthtech.com/news/index.html

Hint: the jack is used as an SPST switch. Hint 2: when designing
modules, always check out commercial products.
___________________
John Blacet
Blacet Research
http://www.blacet.com