[sdiy] Front panel labeling

[mikko.a.helin at nokia.com]

Actually I just came from the postoffice with a blue 19" 5U front panel made
by Schaeffer-Apparatebau, it looks great (to me at least). It was little bit
expensive though (120 euros &pp) but it doesn't matter after all, I don't do
these every day.

-Mikko

btw. The fpd file is here : http://www.uta.fi/~helin/temp/ .It may look too
fancy for someone's taste. I used Tony Allgood's designed panels from
oakleysound.com as a start point - actually I'll put at least his
Superladder1 filter on the panel.)

> -----Original Message-----
> From: ext Dauvit Alexander [mailto:gilmartin at justified-sinner.com]
> Sent: 31. October 2001 17:55
> To: Synth List
> Subject: Re: [sdiy] Front panel labeling
> 
> 
> I found this site which gives you a piece of software to 
> generate front
> panels and then sends the info back to the factory to have it made.
> 
> http://www.schaeffer-apparatebau.de
> 
> The program is free and works well, but I have not played 
> with it enough to
> know if you can generate print outs or whatever from it.  
> Worth a look.
> 
> Dauvit.
>