[sdiy] power transformer pointer ?

[Doug Tymofichuk]

Hello, Elby,

You may have to use more than one transformer to get the 
voltages you need. But it SHOULD be possible to fix, it 
just might have to get a little messy. As a last resort, 
you could always build an external supply.

 The specs of the transformer appear from the schematic and
> manual as follows:  single primary winding that takes 13V at 30 Khz.

13V at 30KHz?????? Is this a typo or is this thing stranger 
than I imagined?


  The
> secondary is tapped, rectified and filtered to produce 2 +55V outputs, + and
> - 12V, +5V (-5V is a feed off the -12V), 2 grounds, and 2 9VAC outputs, a
> total of 9 outputs from the secondary.  Any idea of where to look for
> something like this?   ANY pointers, no matter how vague, are welcome at this
> point.

As I said, your best bet is probably two or more 
transformers.

Take care,
Doug

----------------------
Doug Tymofichuk
dougt at cancerboard.ab.ca