[sdiy] Condenser/Old pre-amp

[Ian Fritz]

This article has general info on wiring phantom power.

  Ian

http://www.hut.fi/Misc/Electronics/circuits/microphone_powering.html

----- Original Message -----
From: "Prospective Volition" <prospective_volition at hotmail.com>
To: <synth-diy at node12b53.a2000.nl>
Sent: Wednesday, May 23, 2001 11:51 PM
Subject: [sdiy] Condenser/Old pre-amp


> Hi there, sorry as this does note relate to synths.
>
> I need to find out a good way to operate a condenser mic with this old
Rola
> pre amp which sounds lovely but doesn't have phantom. I have tried a
y-lead,
> balanced, all pin 2 hot, to take phantom power from the mackie but this
> doesn't seem to work. Would I only need to connect pins 1 + 3 on the
mixer,
> pin 1 being where the +48v comes from. Any suggestions?
>
> Thanks
>
> Vol
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>