[sdiy] Aries modular schematics detail
Grant Richter
grichter at asapnet.net
Mon May 14 23:12:30 CEST 2001
> There are two transistors and a tempco. I tried to measure the value
> of the tempco and I get something like 3K at room temperature. It's a
> NPN / PNP for sure, probably with an extra current source for the
> linear ramp. The triangle is the master and the ramp is syncronised to it.
>
Then it would be from the base of the NPN to ground to form the lower half
of the 1 volt to 18 millivolt divider.
More information about the Synth-diy
mailing list