AW: [sdiy] Looking for infos / Roland System 100m

[Czech Martin]

	Don't use 1/8" ;-> Seriously, way back there was a discussion
	about japanese 1/8" not being the same as other 1/8". I.e.
	they don't fit right from the begining.

	m.c.
	  
	[Czech Martin]  schnipp
> The system I borrowed for this article has 1/8" sockets, that do no good
> connections. It looks like the contacts are to wide or they are corroded.
> Since
> I had to promise, that I won't open the system  (gngngngn....) I cannot
> have a
> look on it. Are there known problems/solutions?
> 
> I found also that several 1/8" plugs I bought, do not fit into the
> sockets, but
> do fit in plugs of a DR55 or the SH-101. 
> Is there a definition of that type of 1/8"-sockets used in the 100m?
	[Czech Martin]  schnipp