March 2001 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Mar 1 01:36:21 CET 2001
Ending: Sat Mar 31 23:54:46 CEST 2001
Messages: 985

• [sdiy] friends don't let friends buy dope-fur!   Thorsten Klose
  • [sdiy] friends don't let friends buy dope-fur!   Antti Huovilainen
• [sdiy] A little bragging...   Bob Aloha
• [sdiy] ROM duplication   edanderson
  • [sdiy] ROM duplication   Greg Montalbano
    • [sdiy] ROM duplication   Richard
  • AW: [sdiy] ROM duplication   Ullrich Peter
  • [sdiy] ROM duplication   Theo
• [sdiy] ultimate beginner - suggestions?   Reverend djbluE
• [sdiy] Sample&Hold thoughts   Plutonique9
  • [sdiy] Sample&Hold thoughts   Happy Harry
    • [sdiy] Sample&Hold thoughts   Paul Maddox
      • [sdiy] testing pots for linear or log??   media at mail1.nai.net
      • [sdiy] testing pots for linear or log??   sasami at blaze.net.au
      • [sdiy] testing pots for linear or log??   Happy Harry
    • [sdiy] 3/4 bit A/D converter (was: Sample&Hold thoughts)   Michael Buchstaller
      • [sdiy] 3/4 bit A/D converter (was: Sample&Hold thoughts)   Happy Harry
      • [sdiy] 3/4 bit A/D converter (was: Sample&Hold thoughts)   Michael Buchstaller
      • [sdiy] 3/4 bit A/D converter (was: Sample&Hold thoughts)   Grant Richter
      • [sdiy] 3/4 bit A/D converter (was: Sample&Hold thoughts)   KA4HJH
      • [sdiy] 3/4 bit A/D converter (was: Sample&Hold thoughts)   Grant Richter
      • [sdiy] 3/4 bit A/D converter (was: Sample&Hold thoughts)   Grant Richter
      • [sdiy] 3/4 bit A/D converter (was: Sample&Hold thoughts)   sasami at blaze.net.au
      • [sdiy] 3/4 bit A/D converter (was: Sample&Hold thoughts)   Grant Richter
    • [sdiy] RE: 3/4 bit A/D converter (was: Sample&Hold thoughts)   Michael Buchstaller
  • [sdiy] Sample&Hold thoughts   Dave Krooshof
  • [sdiy] Sample&Hold thoughts   danial stocks
  • [sdiy] Sample&Hold thoughts   IXQY at aol.com
    • [sdiy] Sk-1 Trigger in mod help?   Plutonique9
      • [sdiy] Sk-1 Trigger in mod help?   Crystal
    • [sdiy] Cypherpunk Noise Source Links (for Dr. Mabuse)   Grant Richter
      • [sdiy] TR-707 Help   Reverend djbluE (Chromatest)
      • [sdiy] TR-707 Help   Reverend djbluE (Chromatest)
  • [sdiy] Sample&Hold thoughts   Happy Harry
• [sdiy] SBM - Recommend Panel Pots & Knobs? Is a 'fake' Scope Risky?   steven_thomas
  • [sdiy] SBM - Recommend Panel Pots & Knobs? Is a 'fake' Scope Risky?   steven_thomas
• [sdiy] front panel legend ( was SBM - Recommend Panel Pots & Knobs? Is a 'fake' Scope Risky?)   steven_thomas
  • [sdiy] front panel legend ( was SBM - Recommend Panel Pots & Knobs? Is a 'fake' Scope Risky?)   steven_thomas
• [sdiy] sineshaper and piece wise linear function update   jorgen.bergfors at idg.se
  • [sdiy] sineshaper and piece wise linear function update   Jim Patchell
    • [sdiy] RS Soldering iron sale   John Blacet
  • [sdiy] sineshaper and piece wise linear function update   Goddard, Duncan
    • [sdiy] sineshaper and piece wise linear function update   Jim Patchell
• [sdiy] TC Electronics SCF   ajohns at chartermi.net
• [sdiy] Re: Talking about vocal filters....   jbv
  • [sdiy] Re: Talking about vocal filters....   Martin Czech
    • [sdiy] Re: Talking about vocal filters....   jbv
• [sdiy] OT trains   Goddard, Duncan
• [sdiy] What filter would you recommend?   vitreousflux
  • [sdiy] What filter would you recommend?   patchell
  • [sdiy] What filter would you recommend?   harry
  • [sdiy] What filter would you recommend?   Paul Maddox
• [sdiy] trainset   danial stocks
  • [sdiy] trainset   sasami at blaze.net.au
• [sdiy] Has anyone used Mackie Pots for a project?   vitreousflux
  • [sdiy] Has anyone used Mackie Pots for a project?   Ian Fritz
    • [sdiy] Has anyone used Mackie Pots for a project?   pH_________
      • [sdiy] Has anyone used Mackie Pots for a project?   RFAHL
      • [sdiy] Has anyone used Mackie Pots for a project?   o b i s : c y g m a
  • [sdiy] Has anyone used Mackie Pots for a project?   Happy Harry
    • [sdiy] Has anyone used Mackie Pots for a project?   vitreousflux
    • [sdiy] Has anyone used Mackie Pots for a project?   Ian Fritz
  • [sdiy] Has anyone used Mackie Pots for a project?   Dave Trenkel
  • [sdiy] Has anyone used Mackie Pots for a project?   Byron G. Jacquot
• [sdiy] The future of synth DIY   Dan Gendreau
  • [sdiy] The future of synth DIY   patchell
  • [sdiy] The future of synth DIY   Scott Gravenhorst
    • [sdiy] The future of synth DIY   Glen
  • [sdiy] The future of synth DIY   Martin Czech
    • [sdiy] The future of synth DIY   Emmanuel AMADIO
    • [sdiy] The future of synth DIY   Scott Bernardi
  • [sdiy] The future of synth DIY   Martin Czech
    • [sdiy] The future of synth DIY   Magnus Danielson
  • [sdiy] The future of synth DIY   Paul Perry
    • [sdiy] The future of synth DIY   Magnus Danielson
  • AW: [sdiy] The future of synth DIY   Haible Juergen
  • [sdiy] The future of synth DIY   Terry Michaels
  • [sdiy] The future of synth DIY   Martin Czech
    • [sdiy] The future of synth DIY   Magnus Danielson
  • [sdiy] The future of synth DIY   Martin Czech
    • [sdiy] The future of synth DIY   harry
      • [sdiy] The future of synth DIY   patchell
      • [sdiy] The future of synth DIY   patchell
  • [sdiy] The future of synth DIY   Curtin, Steven D (Steven)
    • [sdiy] The future of synth DIY   Grant Richter
  • [sdiy] The future of synth DIY   danial stocks
    • [sdiy] The future of synth DIY   harry
  • [sdiy] The future of synth DIY   Scott Gravenhorst
    • [sdiy] The future of synth DIY   Magnus Danielson
      • [sdiy] The future of synth DIY   Glen
      • [sdiy] The future of synth DIY   harry
  • [sdiy] The future of synth DIY   Magnus Danielson
  • [sdiy] The future of synth DIY   Synthmanic at aol.com
  • [sdiy] The future of synth DIY   Martin Czech
• [sdiy] OT: Simpson 372 Ohmeter problem   KA4HJH
• [sdiy] Fw: MOTM & UEG demos   Paul Schreiber
• [sdiy] Mic capsules - Whodunnit?   Byron G. Jacquot
• [sdiy] Questions about Pots   theinmans at mindspring.com
• [sdiy] Archive Font changed !   Michael Buchstaller
• [sdiy] PWM phaser problems   Paul Perry
  • [sdiy] PWM phaser problems   Martin Czech
• [sdiy] How many synths do you need?   Paul Maddox
  • [sdiy] How many synths do you need?   ElmacacoX at aol.com
    • [sdiy] How many synths do you need?   Theo
  • [sdiy] How many synths do you need?   Jim Johnson
  • [sdiy] How many synths do you need?   Sebastian Kuehnl
  • [sdiy] How many synths do you need?   Oliver Sampson
• [sdiy] Serge and multiples   Grant Richter
  • [sdiy] Serge and multiples   Martin Czech
  • [sdiy] Serge and multiples   Happy Harry
    • [sdiy] Serge and multiples   Magnus Danielson
      • [sdiy] Serge and multiples   harry
  • [sdiy] Serge and multiples   Martin Czech
• [sdiy] how many keyboards??   deknow at deknow.com
  • [sdiy] how many keyboards??   o b i s : c y g m a
• [sdiy] delete this message - unsubscribe stuff   Mike I.
• [sdiy] DIY Website Archive Notice   Scott Gravenhorst
• [sdiy] Electronics Workbench   danielle o'hallisey
  • [sdiy] Electronics Workbench   Grant Richter
    • [sdiy] Electronics Workbench   Colin Fraser
    • [sdiy] Electronics Workbench   harry
• [sdiy] New Elektor issue   jbv
  • [sdiy] New Elektor issue   jbv
  • [sdiy] New Elektor issue   Byron G. Jacquot
    • [sdiy] Hobby Metal Plating and Anodizing link   Grant Richter
    • [sdiy] Semi-Pro PCB gear   Grant Richter
    • [sdiy] Think and Tinker DIY PC guide   Grant Richter
• [sdiy] Aluminum Panel Thickness   vitreousflux
  • [sdiy] Aluminum Panel Thickness   Scott Gravenhorst
    • [sdiy] Control Voltage Questions   james
      • [sdiy] Control Voltage Questions   Theo
      • [sdiy] Control Voltage Questions   Colin Fraser
      • [sdiy] Control Voltage Questions   Grant Richter
    • [sdiy] Aluminum Panel Thickness   Paul Perry
    • [sdiy] Aluminum Panel Thickness   Nicholas Pelkey
      • [sdiy] Aluminum Panel Thickness   Chris Bryant
    • [sdiy] Aluminum Panel Thickness   Scott Gravenhorst
      • [sdiy] Aluminum Panel Thickness   Rob
      • [sdiy] Aluminum Panel Thickness   harry
  • [sdiy] Aluminum Panel Thickness   Tony Allgood
• [sdiy] the Beowulf project   jbv
  • [sdiy] the Beowulf project   Paul Perry
• [sdiy] Voltage Shaper   patchell
  • [sdiy] Voltage Shaper   Microtonal
  • [sdiy] Simple Env. Followers?   Plutonique9
    • [sdiy] Simple Env. Followers?   Paul Perry
  • [sdiy] Voltage Shaper   Microtonal
    • [sdiy] Voltage Shaper   patchell
• [sdiy] Date: Sat, 3 Mar 2001 18:33:53 -0700   Crystal
• [sdiy] Re: [AH] simple ASM-1 questions   Magnus Danielson
• [sdiy] CCD   danial stocks
• [sdiy] VB2 vibrato   danial stocks
• [sdiy] Front Panels   Paul Maddox
  • [sdiy] Front Panels   Scott Gravenhorst
  • [sdiy] Front Panels   Kevin Peek
  • [sdiy] Front Panels   harry
    • [sdiy] Re: Front Panels   Edu Silva
      • [sdiy] Re: Front Panels   Colin Fraser
    • [sdiy] Front Panels   Magnus Danielson
      • [sdiy] Front Panels   patchell
      • [sdiy] Front Panels   Theo
      • [sdiy] Front Panels   Matti
    • [sdiy] Front Panels   Rob
• [sdiy] More magazines + synth ideas   Neil Johnson
• [sdiy] my polysynth project   Kenneth Martinez
  • [sdiy] my polysynth project   patchell
  • [sdiy] my polysynth project   Kenneth Martinez
  • [sdiy] my polysynth project   Kenneth Martinez
• [sdiy] Mn3885 delay ic, was ccd delay   Peter Blackett
• [sdiy] Site update. New LFO and PCBs   Ken Stone
• [sdiy] Hydrofloric Acid ***WARNING***   Paul Perry
  • [sdiy] Hydrofloric Acid ***WARNING***   danial stocks
  • [sdiy] Hydrofloric Acid ***WARNING***   KA4HJH
  • [sdiy] Hydrofloric Acid ***WARNING***   John Blacet
  • [sdiy] Hydrofloric Acid ***WARNING***   Keith Winstanley
  • [sdiy] Hydrofloric Acid ***WARNING***   Theo
  • [sdiy] Hydrofloric Acid ***WARNING***   Mike I.
• [sdiy] My $0.02 on Panel Design - Computer Cases!   vitreousflux
• [sdiy] MOTM Power Supply Connector   patchell
  • [sdiy] MOTM Power Supply Connector   Paul Schreiber
• [sdiy] Wave/Voltage Shaper Update   patchell
• [sdiy] Archives download problem   M.Umut Sarac
• [sdiy] env follows   ohveryfunny5
• [sdiy] voltage control primer?   Alex Dickey
  • [sdiy] voltage control primer?   harry
    • [sdiy] Foil Tape?   Moho Disco
      • [sdiy] Foil Tape?   harry
      • [sdiy] Foil Tape?   tpaddock at seanet.com
      • [sdiy] Foil Tape?   Scott Gravenhorst
      • [sdiy] Foil Tape?   Moho Disco
      • [sdiy] Foil Tape?   Paul Perry
      • [sdiy] Foil Tape?   Moho Disco
      • [sdiy] Foil Tape?   harry
• [sdiy] Health Hazard from Solder Fumes   Mike I.
  • [sdiy] Health Hazard from Solder Fumes   ElmacacoX at aol.com
    • [sdiy] Health Hazard from Solder Fumes   Paul Perry
      • [sdiy] Health Hazard from Solder Fumes   Michael Buchstaller
    • [sdiy] Health Hazard from Solder Fumes   danial stocks
    • [sdiy] Health Hazard from Solder Fumes   jorgen.bergfors at idg.se
    • [sdiy] Health Hazard from Solder Fumes   Curtin, Steven D (Steven)
    • [sdiy] Health Hazard from Solder Fumes   Tony Clark
  • [sdiy] Health Hazard from Solder Fumes   Plutonique9
• [sdiy] BERGFOTRON   M.Umut Sarac
• [sdiy] Synapse Analog Shift Register Article - Arpad Benares   Fahl, Romeo
  • [sdiy] Synapse Analog Shift Register Article - Arpad Benares   Sebastian Kuehnl
    • [sdiy] Synapse Analog Shift Register Article etc   Steve Ridley
      • [sdiy] EFM news   tomg at efm
      • [sdiy] 303f - fix   tomg at efm
      • [sdiy] 303c demo   tomg at efm
  • [sdiy] Synapse Analog Shift Register Article - Arpad Benares   jhaible at t-online.de
• [sdiy] PCB TO SCHEMA   M.Umut Sarac
• [sdiy] SCHEMA TO PCB   M.Umut Sarac
  • [sdiy] SCHEMA TO PCB   patchell
• [sdiy] unsubcribe   Jukka Andersson
• [sdiy] 5V regulators   Keith Winstanley
  • [sdiy] 5V regulators   harry
    • [sdiy] 5V regulators   danial stocks
      • [sdiy] 5V regulators   harry
    • [sdiy] 5V regulators   Keith Winstanley
    • [sdiy] 5V regulators   Curtin, Steven D (Steven)
    • [sdiy] 5V regulators   sasami at blaze.net.au
      • [sdiy] 5V regulators   KA4HJH
    • [sdiy] 5V regulators   Keith Winstanley
  • [sdiy] 5V regulators   patchell
• [sdiy] EasyTrax   patchell
• [sdiy] breadboards   danial stocks
  • [sdiy] breadboards   Ken Stone
    • [sdiy] Additive synthesis news   Neil Johnson
      • [sdiy] Additive synthesis news   mikko.a.helin at nokia.com
      • [sdiy] paia   Matti
      • [sdiy] paia   Michael Buchstaller
      • [sdiy] paia   Grant Richter
      • [sdiy] paia   Scott Gravenhorst
      • [sdiy] paia   Robert P. Donker
      • [sdiy] silly newbie question   Matti
    • [sdiy] Archive search updated !   Michael Buchstaller
    • [sdiy] ASM1 in action and tnx u.   Aln
• [sdiy] [AH] Blacet Research News for March 2001   John Blacet
• [sdiy] Resistive Strip Construction Article?   Jon Darby
  • [sdiy] Resistive Strip Construction Article?   The Peasant
• [sdiy] Synapse Analog Shift Register Article - Arpad Benares aka Serge Tcherepnin   Fahl, Romeo
• [sdiy] Comparator = Opamp ??   Peter van Hamersveld
  • [sdiy] Comparator = Opamp ??   harry
  • [sdiy] Comparator = Opamp ??   >>>marjan<<<
  • [sdiy] Comparator = Opamp ??   Jim Patchell
  • [sdiy] Comparator = Opamp ??   jh.
    • [sdiy] Comparator = Opamp ??   Rob
      • [sdiy] Comparator = Opamp ??   harry
      • wasp (was: Re: [sdiy] Comparator = Opamp ??)   jh.
      • wasp (was: Re: [sdiy] Comparator = Opamp ??)   >>>marjan<<<
      • wasp (was: Re: [sdiy] Comparator = Opamp ??)   WeAreAs1 at aol.com
      • wasp (was: Re: [sdiy] Comparator = Opamp ??)   >>>marjan<<<
      • wasp (was: Re: [sdiy] Comparator = Opamp ??)   Lincoln Fong
      • [sdiy] Re: wasp   Edu Silva
      • wasp (was: Re: [sdiy] Comparator = Opamp ??)   WeAreAs1 at aol.com
      • wasp (was: Re: [sdiy] Comparator = Opamp ??)   Don Tillman
      • [sdiy] Re: Companders   Glen
      • AW: [sdiy] Re: Companders   Ullrich Peter
      • AW: [sdiy] Re: Companders   mark verbos
      • [sdiy] Re: Companders   Don Tillman
      • [sdiy] Re: Companders   Glen
      • [sdiy] Re: Companders   Steve Ridley
      • AW: AW: [sdiy] Re: Companders   Ullrich Peter
      • [sdiy] Re: Companders   Hugo Haesaert
      • wasp (was: Re: [sdiy] Comparator = Opamp ??)   jh.
      • wasp (was: Re: [sdiy] Comparator = Opamp ??)   jh.
      • wasp (was: Re: [sdiy] Comparator = Opamp ??)   CHoaglin at aol.com
      • wasp (was: Re: [sdiy] Comparator = Opamp ??)   DCMagnuson at aol.com
• [sdiy] NEWBEES are alive and kickin' !   Peter van Hamersveld
  • [sdiy] NEWBEES are alive and kickin' !   harry
  • [sdiy] NEWBEES are alive and kickin' !   >>>marjan<<<
  • [sdiy] NEWBEES are alive and kickin' !   David Halliday
• [sdiy] Shielded Cable   Jim Patchell
  • [sdiy] Shielded Cable   Grant Richter
  • [sdiy] Shielded Cable   Byron G. Jacquot
  • [sdiy] Shielded Cable   Tony Allgood
• [sdiy] lead and batteries   danial stocks
  • [sdiy] lead and batteries   CHoaglin at aol.com
• [sdiy] Ovens for oscillators?   Glen
  • [sdiy] Ovens for oscillators?   Grant Richter
  • [sdiy] Ovens for oscillators?   Magnus Danielson
  • [sdiy] Ovens for oscillators?   patchell
  • [sdiy] Ovens for oscillators?   CHoaglin at aol.com
    • [sdiy] Ovens for oscillators?   Jim Patchell
  • [sdiy] Ovens for oscillators?   sasami at blaze.net.au
• [sdiy] OT: Forget solder alloys--thinking process now patented!   KA4HJH
• [sdiy] AD633   patchell
  • [sdiy] AD633   tpaddock at seanet.com
  • [sdiy] AD633   Paul Maddox
• [sdiy] Psycho LFO and Sub Oscillator boards   Ken Stone
• [sdiy] unsubscribe synth-diy   skinny bastard
  • [sdiy] unsubscribe synth-diy   Peter Snow
• [sdiy] ( Sort of) Ovens for oscillators?   Hcabnivek at aol.com
• [sdiy] separate waveform outputs ?   Kenneth Martinez
  • [sdiy] separate waveform outputs ?   harry
  • [sdiy] separate waveform outputs ?   Jim Johnson
  • [sdiy] separate waveform outputs ?   Grant Richter
    • [sdiy] separate waveform outputs ?   Torbjörn Hörnfeldt
  • [sdiy] separate waveform outputs ?   Tony Allgood
• [sdiy] Anyone have a parts list for EFM RXCV-Pro?   vitreousflux
• [sdiy] Attenuators   Michael Both
  • [sdiy] Attenuators   harry
• [sdiy] Nothing box   >>>marjan<<<
  • [sdiy] Nothing box   Torbjörn Hörnfeldt
  • [sdiy] Nothing box   tomg at efm
    • [sdiy] Nothing box   Moho Disco
  • [sdiy] OT GPS tech details   Grant Richter
    • [sdiy] OT GPS tech details   Magnus Danielson
• [sdiy] Yamaha TG-77 hardware mods?   Glen
  • [sdiy] Yamaha TG-77 hardware mods?   Neil Johnson
• [sdiy]   Andrew Dixon
  • [sdiy]   patchell
• [sdiy] Join SMOG now! (Serge Modular Owners Group)   matt wilson
  • [sdiy] [AH] Improving Moog 921A [long]   Paul Schreiber
    • [sdiy] Re: [AH] Improving Moog 921A [long]   Paul Schreiber
    • [sdiy] Re: [AH] Improving Moog 921A [long]   Magnus Danielson
• [sdiy] CV mixer overload?   Kenneth Martinez
  • [sdiy] CV mixer overload?   John Blacet
    • [sdiy] CV mixer overload?   Steve Ridley
  • [sdiy] CV mixer overload?   Kenneth Martinez
• [sdiy] Patch cables for modular synth   vitreousflux
• [sdiy] CS10 schemos   Yves Usson
• [sdiy] Des Phillps thesis now in PDF format   Neil Johnson
• [sdiy] Boss PC-2 schematics?   Drew Smith
• [sdiy] Miniwave EPROMS   Keith Winstanley
  • [sdiy] Miniwave EPROMS   Happy Harry
    • [sdiy] Miniwave EPROMS   Grant Richter
      • [sdiy] Miniwave EPROMS   John Blacet
      • [sdiy] Miniwave EPROMS   Grant Richter
  • [sdiy] Miniwave EPROMS   Keith Winstanley
  • [sdiy] Miniwave EPROMS   CHoaglin at aol.com
  • [sdiy] MiniWave EPROMS   Happy Harry
• [sdiy] speaker/jack substitution   Alex Dickey
• [sdiy] Moog MG-1   rob
  • [sdiy] Moog MG-1   Jon Darby
  • [sdiy] Moog MG-1   david leigh
    • [sdiy] Help wanted with PPG 2.2 problem   Bert Vermeulen
      • [sdiy] Help wanted with PPG 2.2 problem   Paul Maddox
      • [sdiy] Help wanted with PPG 2.2 problem   Chris Crosskey
      • [sdiy] Help wanted with PPG 2.2 problem   Paul Maddox
      • [sdiy] Help wanted with PPG 2.2 problem   Richard
  • [sdiy] Moog MG-1   Florian Anwander
    • [sdiy] Moog MG-1 online schematics   Plutonique9
• [sdiy] Hot-rodding the Moog 921B [long]   Paul Schreiber
  • [sdiy] Hot-rodding the Moog 921B [long]   Terry Michaels
• [sdiy] frequency shifter   Sebastian Kuehnl
• [sdiy] unsubscribe   Ian Sabell
  • [sdiy] unsubscribe   Goddard, Duncan
  • [sdiy] unsubscribe   Perry, Jeff
  • [sdiy] unsubscribe   lil' robbie
• [sdiy] Yamaha SY-2 schematic needed   MRATX at aol.com
• [sdiy] LM336Z-5 and 2N3904 Equivalents   vitreousflux
  • [sdiy] LM336Z-5 and 2N3904 Equivalents   mark verbos
  • [sdiy] LM336Z-5 and 2N3904 Equivalents   danial stocks
    • [sdiy] LM336Z-5 and 2N3904 Equivalents   harry
    • [sdiy] LM336Z-5 and 2N3904 Equivalents   Paul Maddox
  • [sdiy] LM336Z-5 and 2N3904 Equivalents   Terry Michaels
    • [sdiy] LM336Z-5 and 2N3904 Equivalents   Ken MacBeth
    • [sdiy] LM336Z-5 and 2N3904 Equivalents   Michael Buchstaller
  • [sdiy] LM336Z-5 and 2N3904 Equivalents   vitreousflux
    • [sdiy] LM336Z-5 and 2N3904 Equivalents   Tony Clark
• [sdiy] [SDIY]Improving Moog 901A   Turner Wallace
  • [sdiy] [SDIY]Improving Moog 901A   Magnus Danielson
  • [sdiy] [SDIY]Improving Moog 901A   Terry Michaels
• [sdiy] Not improving the 901A/901B   Paul Schreiber
• [sdiy] tube filter topologies...   Nick Zuccaro
  • [sdiy] tube filter topologies...   Ken Stone
  • [sdiy] tube filter topologies...   Michael Buchstaller
• [sdiy] tama techstar guts..   Nick Zuccaro
  • [sdiy] tama techstar guts..   Florian Anwander
  • [sdiy] tama techstar guts..   Florian Anwander
    • [sdiy] Most widely used IC   Vol
      • [sdiy] Most widely used IC   jorgen.bergfors at idg.se
      • [sdiy] Most widely used IC   Paul Maddox
      • [sdiy] Most widely used IC   Joachim Verghese
      • [sdiy] Most widely used IC   danial stocks
      • [sdiy] Most widely used IC   The Old Crow
      • [sdiy] Most widely used IC   Jim Patchell
      • [sdiy] Speaking of OTAs....   J. Larry Hendry
      • [sdiy] Speaking of OTAs....   Happy Harry
      • [sdiy] Speaking of OTAs....   Happy Harry
      • [sdiy] Speaking of OTAs....   Grant Richter
      • [sdiy] Speaking of OTAs....   Happy Harry
      • [sdiy] Speaking of OTAs....   jh.
      • [sdiy] Speaking of OTAs....   Grant Richter
      • [sdiy] Speaking of OTAs....   John Blacet
      • [sdiy] Speaking of OTAs/Matched Pairs????   Kevin Peek
      • [sdiy] Speaking of OTAs/Matched Pairs????   Jim Patchell
      • [sdiy] Speaking of OTAs/Matched Pairs????   Paul Schreiber
      • [sdiy] Speaking of OTAs/Matched Pairs????   Jim Patchell
      • [sdiy] Speaking of OTAs/Matched Pairs????   Colin Fraser
      • [sdiy] Speaking of OTAs/Matched Pairs????   patchell
      • [sdiy] Speaking of OTAs/Matched Pairs????   harry
      • [sdiy] Speaking of OTAs/Matched Pairs????   ElmacacoX at aol.com
      • [sdiy] Speaking of OTAs/Matched Pairs????   harry
      • [sdiy] Speaking of OTAs/Matched Pairs????   ElmacacoX at aol.com
      • [sdiy] Speaking of OTAs/Matched Pairs????   Jim Patchell
      • [sdiy] Speaking of OTAs/Matched Pairs????   The Old Crow
      • [sdiy] Speaking of OTAs/Matched Pairs????   Rob
      • [sdiy] Speaking of OTAs/Matched Pairs????   Grant Richter
      • [sdiy] Speaking of OTAs/Matched Pairs????   Paul Perry
      • [sdiy] Speaking of OTAs....   Paul Maddox
      • [sdiy] Speaking of OTAs....   Neil Johnson
      • [sdiy] Speaking of OTAs....   Paul Maddox
      • [sdiy] Speaking of OTAs....   John Blacet
      • [sdiy] Speaking of OTAs....   Jim Patchell
      • [sdiy] Speaking of OTAs....   J. Larry Hendry
      • [sdiy] Speaking of OTAs....   Jim Patchell
      • [sdiy] Most widely used IC   Martin Czech
      • [sdiy] Most widely used IC   Happy Harry
• [sdiy] tuning oscillators   Dave Krooshof
  • [sdiy] tuning oscillators   harry
    • [sdiy] tuning oscillators   Dave Krooshof
  • [sdiy] tuning oscillators   Magnus Danielson
• [sdiy] ARP-Quadra and SCI Sixtrack   Bert Vermeulen
• [sdiy] LED backlit panels   Kevin Peek
  • [sdiy] LED backlit panels   KA4HJH
  • [sdiy] LED backlit panels   Theo
• [sdiy] Fostex 812 mixer   Richard
• [sdiy] 909 PSU modded?   Synthusiast
  • [sdiy] 909 PSU modded?   media at mail1.nai.net
• [sdiy] Kill the 303 spirit   Andreas H
• [sdiy] BassAce - no midi :(   paul
  • [sdiy] BassAce - no midi :(   paul
• [sdiy] pressure sensitive ribbon controller   Sarth
  • [sdiy] pressure sensitive ribbon controller   Ingo Debus
• [sdiy] Improving Moog 921   riccardo
  • [sdiy] Improving Moog 921   Terry Michaels
  • [sdiy] Improving Moog 921   WeAreAs1 at aol.com
• [sdiy] JX10 firmware update   Colin Fraser
  • [sdiy] JX10 firmware update   Emmanuel AMADIO
• [sdiy] Re: [efm] SBM Parts Lists Errors <----- Tom G Please Read   harry
  • [sdiy] Re: [efm] SBM Parts Lists Errors <----- Tom G Please Read   Michael Buchstaller
• [sdiy] Siel PX   Jason Zastrow
• [sdiy] thanx on the mg-1   rob
  • [sdiy] Modifications to the mg-1   Florian Anwander
• [sdiy] Boss PC-2, JoMoX XBase-09   Drew Smith
  • [sdiy] Boss PC-2, JoMoX XBase-09   Thomas Hudson
    • [sdiy] Boss PC-2, JoMoX XBase-09   Tentochi
  • [sdiy] Boss PC-2, JoMoX XBase-09   Trevor Page
    • [sdiy] Boss PC-2, JoMoX XBase-09   Rob
      • [sdiy] Boss PC-2, JoMoX XBase-09   Colin Fraser
      • [sdiy] Boss PC-2, JoMoX XBase-09   Rob
  • [sdiy] Boss PC-2, JoMoX XBase-09   DCMagnuson at aol.com
  • [sdiy] Boss PC-2, JoMoX XBase-09   danial stocks
• [sdiy] Second Sourced MAT-02, LM394, etc.   Schwan.David
• [sdiy]Improving Moog901A   Turner Wallace
• [Fwd: Re: [sdiy] Boss PC-2, JoMoX XBase-09]   Florian Anwander
  • [Fwd: Re: [sdiy] Boss PC-2, JoMoX XBase-09]   Colin Fraser
    • [sdiy] 4 Remaining Buchla Thunders on eBay (from Don)   Grant Richter
      • [sdiy] 4 Remaining Buchla Thunders on eBay (from Don)   Fahl, Romeo
      • [sdiy] 4 Remaining Buchla Thunders on eBay (from Don)   sarth at sarth.net
• [sdiy] Modifications to the mg-1]   Florian Anwander
  • [sdiy] 4136??   media at mail1.nai.net
    • [sdiy] 4136??   Christian Hofmann
    • [sdiy] 4136??   jdec at mindspring.com
      • [sdiy] 4136??   Christian Hofmann
      • [sdiy] 4136??   Torbjörn Hörnfeldt
      • [sdiy] 4136??   Edu Silva
    • [sdiy] 4136??   Tony Allgood
    • [sdiy] 4136??   Martin Czech
      • [sdiy] 4136??   Tony Allgood
      • 4558 replacement (WAS: [sdiy] 4136??)   Antti Huovilainen
      • 4558 replacement (WAS: [sdiy] 4136??)   Martin Czech
      • 4558 replacement (WAS: [sdiy] 4136??)   ElmacacoX at aol.com
      • 4558 replacement (WAS: [sdiy] 4136??)   Happy Harry
      • [sdiy] 4136??   Torbjörn Hörnfeldt
    • [sdiy] 4136??   Happy Harry
      • [sdiy] 4136??   Grant Richter
    • [sdiy] 4136??   Martin Czech
• [Fwd: Re: [sdiy] Boss PC-2, JoMoX XBase-09]]   Florian Anwander
• Fw: [sdiy] Siel PX please help me   Jason Zastrow
• [sdiy] ROM duplication & MT-32   Greg Montalbano
  • [sdiy] ROM duplication & MT-32   Theo
  • [sdiy] ROM duplication & MT-32   Theo
  • [sdiy] ROM duplication & MT-32   Theo
• [sdiy] SG3402N, MFC6040   Edu Silva
  • [sdiy] SG3402N, MFC6040   Ken MacBeth
    • [sdiy] SG3402N, MFC6040   Edu Silva
  • [sdiy] SG3402N, MFC6040   Jim Patchell
  • [sdiy] SG3402N, MFC6040   Happy Harry
  • [sdiy] SG3402N, MFC6040   Torbjörn Hörnfeldt
  • [sdiy] SG3402N, MFC6040   Paul Perry
• [sdiy] New MOTM module   Paul Schreiber
• [sdiy] Re: [efm] 303c demo   tomg at efm
  • [sdiy] 303f page   tomg at efm
  • [sdiy] Re: [efm] 303c demo   tomg at efm
    • [sdiy] 303d   tomg at efm
      • [sdiy] 303d   tomg at efm
      • [efm] Re: [sdiy] 303d   tomg at efm
• [sdiy] it's that time again...   Greg Montalbano
  • [sdiy] it's that time again...   Torbjörn Hörnfeldt
  • [sdiy] it's that time again...   Florian Anwander
• [sdiy] Roland drum trigger spec's   nss at hevanet.com
  • [sdiy] Roland drum trigger spec's   Colin Fraser
    • [sdiy] Roland drum trigger spec's   nss at hevanet.com
      • [sdiy] Roland drum trigger spec's   Colin Fraser
      • [sdiy] Roland drum trigger spec's   nss at hevanet.com
  • [sdiy] Roland drum trigger spec's   Happy Harry
• [sdiy] Need CEM3330 Urgently   Paul Maddox
• [sdiy] TB-303 rez dual pot? Needed?   Rob
• [sdiy] Heat Paste/Compound   Reverend djbluE (Chromatest)
  • [sdiy] Heat Paste/Compound   Paul Perry
    • [sdiy] Heat Paste/Compound   Mike Granger
  • [sdiy] Heat Paste/Compound   Terry Michaels
    • [sdiy] Heat Paste/Compound   Dana.Scott
  • [sdiy] Heat Paste/Compound   Mike Granger
  • [sdiy] Heat Paste/Compound   Happy Harry
  • [sdiy] Heat Paste/Compound   Happy Harry
• [sdiy] Cool freeware   david leigh
• [sdiy] OT: sequencing over the internet   Kyn Si
  • [sdiy] OT: sequencing over the internet   Dan Gendreau
    • [sdiy] OT: sequencing over the internet   Glen
      • [sdiy] OT: sequencing over the internet   sarth at sarth.net
      • [sdiy] OT: sequencing over the internet   Curtin, Steven D (Steven)
      • [sdiy] OT: sequencing over the internet   Drew Smith
      • [sdiy] OT: sequencing over the internet   Dave Krooshof
      • [sdiy] OT: sequencing over the internet   Mikhail Tomsky
      • [sdiy] OT: sequencing over the internet   Torbjörn Hörnfeldt
      • SV: [sdiy] OT: sequencing over the internet   Karl Helmer Torvmark
      • [sdiy] OT: sequencing over the internet   Torbjörn Hörnfeldt
      • [sdiy] OT: sequencing over the internet   Colin Fraser
      • [sdiy] OT: sequencing over the internet   Moho Disco
      • [sdiy] OT: sequencing over the internet   KHeck73 at aol.com
      • [sdiy] OT: sequencing over the internet   Kyn Si
      • [sdiy] OT: sequencing over the internet   Colin Fraser
  • [sdiy] OT: sequencing over the internet   Curtin, Steven D (Steven)
    • [sdiy] OT: sequencing over the internet   Colin Fraser
  • [sdiy] OT: sequencing over the internet   Anderson, Robert O
  • [sdiy] OT: sequencing over the internet   Chris Randall
    • [sdiy] OT: sequencing over the internet   Jim Johnson
• [sdiy] Simple slew problem...   mark verbos
• [sdiy] sig 2527   mark verbos
  • [sdiy] sig 2527   The Old Crow
• Fwd: Re: [sdiy] OT: sequencing over the internet - PUBLIC SERVICE   Kyn Si
• Fw: [sdiy] Heat Paste/Compound   Dana.Scott
• [sdiy] [OT]Opcode Studio 5   Jim Patchell
• [sdiy] <blonde mode on>   Happy Harry
  • [sdiy] <blonde mode on>   tomg at efm
• [sdiy] OT: email test (sorry)   KA4HJH
• [sdiy] master list of component to freq conversion?   Alex Dickey
  • [sdiy] master list of component to freq conversion?   Happy Harry
  • [sdiy] freq conversion [harry, don't read! easy stuff mode]   Dave Krooshof
• [sdiy] Best Seq PIC   Andreas H
  • [sdiy] Best Seq PIC   The Old Crow
    • [sdiy] Best Seq PIC   Paul Maddox
      • [sdiy] Best Seq PIC   The Old Crow
      • [sdiy] Best Seq PIC   The Proteus
      • SV: [sdiy] Best Seq PIC   Andreas H
  • [sdiy] Best Seq PIC   Thorsten Klose
• [sdiy] polyphonic synthesis   Seb Carr
  • [sdiy] polyphonic synthesis   harry
    • [sdiy] polyphonic synthesis   mikko.a.helin at nokia.com
      • [sdiy] Polyphonic-PAIA-MIDI to CV converter   Kevin Peek
      • [sdiy] Re: [AH] Polyphonic-PAIA-MIDI to CV converter   Tony Allgood
  • [sdiy] polyphonic synthesis   deega
    • [sdiy] polyphonic synthesis   Ingo Debus
      • [sdiy] polyphonic synthesis   Matti
    • [sdiy] polyphonic synthesis   Paul Maddox
      • [sdiy] polyphonic synthesis   Michael Buchstaller
      • [sdiy] polyphonic synthesis   Paul Maddox
  • [sdiy] polyphonic synthesis   ElmacacoX at aol.com
  • [sdiy] polyphonic synthesis   Tony Allgood
    • [sdiy] polyphonic synthesis   The Old Crow
      • [sdiy] polyphonic synthesis   jh.
      • [sdiy] polyphonic synthesis   Paul Maddox
  • [sdiy] polyphonic synthesis   Kenneth Martinez
    • [sdiy] polyphonic synthesis   Paul Maddox
  • [sdiy] polyphonic synthesis   Paul Maddox
• [sdiy] Vintage tube "synth" on Ebay   Marc Bareille
  • [sdiy] Vintage tube "synth" on Ebay   sasami at blaze.net.au
• [sdiy] fat controller owners near Maine or Cambridge Mass   Nicholas Pelkey
• [sdiy] TB3030 PCBs   Tony Allgood
  • [sdiy] pin 5 3080   Ken MacBeth
    • [sdiy] pin 5 3080   Trevor Page
      • [sdiy] pin 5 3080   Scott Bernardi
    • [sdiy] pin 5 3080   Martin Czech
    • [sdiy] pin 5 3080   Don Tillman
      • [sdiy] pin 5 3080   >>>marjan<<<
    • [sdiy] pin 5 3080   Martin Czech
    • [sdiy] pin 5 3080   Paul Maddox
• [sdiy] sito   Raoul Raffagli
• [sdiy] cables   Ian Fritz
  • [sdiy] Caswell Plating   Grant Richter
• [sdiy] Question...   Chris Randall
• [sdiy] TC5514 s-ram chip needed   Tony Allgood
  • [sdiy] TC5514 s-ram chip needed   Trevor Page
  • [sdiy] TC5514 s-ram chip needed   Anderson, Robert O
    • [sdiy] TC5514 s-ram chip needed   Tony Allgood
  • [sdiy] TC5514 s-ram chip needed   The Old Crow
• [sdiy] hello, and a few questions   Mountain Man
  • [sdiy] hello, and a few questions   Paul Perry
• [sdiy] Octave divider for guitar/bass   Antti Huovilainen
  • [sdiy] Octave divider for guitar/bass   Curtin, Steven D (Steven)
  • [sdiy] Octave divider for guitar/bass   Happy Harry
  • [sdiy] Octave divider for guitar/bass   Nicholas Pelkey
• [sdiy] MOTM Bach!   Paul Schreiber
• [sdiy] Texas Instruments IC Question   Jason Zastrow
• [sdiy] programming eproms and file formats ?   Peter Blackett
  • [sdiy] programming eproms and file formats ?   Curtin, Steven D (Steven)
  • [sdiy] programming eproms and file formats ?   Jim Patchell
• [sdiy] They're heerrreee....   Jim Patchell
• [sdiy] AD633JN   patchell
• [sdiy] 2 unrelated questions.   Seb Carr
  • [sdiy] 2 unrelated questions.   harry
  • [sdiy] 2 unrelated questions.   Paul Maddox
  • [sdiy] 2 unrelated questions.   Dave Krooshof
    • [sdiy] 2 unrelated questions, Kyn Si check this out!   Dave Krooshof
• [sdiy] Monowave   Paul Maddox
  • [sdiy] Monowave   Dave Krooshof
• [sdiy] How do i make a simple filter resonant ?   Michael Buchstaller
  • [sdiy] How do i make a simple filter resonant ?   Tony Clark
  • [sdiy] How do i make a simple filter resonant ?   Theo
    • [sdiy] How do i make a simple filter resonant ?   Michael Buchstaller
  • [sdiy] How do i make a simple filter resonant ?   harry
    • [sdiy] How do i make a simple filter resonant ?   Tony Allgood
• [sdiy] Matrix keyboard idea   steve jones
  • [sdiy] Matrix keyboard idea   Byron G. Jacquot
    • [sdiy] Matrix keyboard idea   harry
      • [sdiy] Matrix keyboard idea   Paul Maddox
      • [sdiy] MiniWave EPROMS   Grant Richter
      • [sdiy] Matrix keyboard idea   harry
      • numbers (Re: [sdiy] Matrix keyboard idea)   Sebastian Kuehnl
      • numbers (Re: [sdiy] Matrix keyboard idea)   harry
      • [sdiy] Matrix keyboard idea   Paul Maddox
  • [sdiy] Matrix keyboard idea   harry
    • [sdiy] Matrix keyboard idea   Ingo Debus
  • AW: [sdiy] Matrix keyboard idea   Ullrich Peter
    • [sdiy] Matrix keyboard idea   Colin Fraser
      • [sdiy] Matrix keyboard idea   The Old Crow
  • AW: [sdiy] Matrix keyboard idea   Ullrich Peter
    • [sdiy] Matrix keyboard idea   Colin Fraser
      • [sdiy] Matrix keyboard idea   The Old Crow
      • [sdiy] Matrix keyboard idea   The Old Crow
    • [sdiy] Matrix keyboard idea   Paul Maddox
  • AW: [sdiy] Matrix keyboard idea   Ullrich Peter
• [sdiy] ye olde sawtooth   Sebastian Kuehnl
  • [sdiy] ye olde sawtooth   Matti
    • [sdiy] ye olde sawtooth   Antti Huovilainen
• [sdiy] Filters   Chris Crosskey
  • [sdiy] Filters   Grant Richter
    • [sdiy] Filters   Theo
• [sdiy] How to prevent latch-up   nss at hevanet.com
• [sdiy] pearly gates closed?   ElmacacoX at aol.com
  • [sdiy] pearly gates closed?   deega
    • [sdiy] pearly gates closed?   Sebastian Kuehnl
  • [sdiy] pearly gates closed?   IXQY at aol.com
• [sdiy] Evenfall Mini Modular   Jozka Neduchal
  • [sdiy] Evenfall Mini Modular   Mountain Man
    • [sdiy] Evenfall Mini Modular   Grant Richter
      • [sdiy] Evenfall Mini Modular   Chris MacDonald
• [sdiy] Been back on the list for five minutes and already with the questions...   jlippard
  • [sdiy] Been back on the list for five minutes and already with the questions...   Happy Harry
• [sdiy] EM Modular Overview Article   John Blacet
• [sdiy] Parts for Oberheim?   Glen
• [sdiy] remind me   ElmacacoX at aol.com
• [sdiy] MT-32 upgrade   Greg Montalbano
• [sdiy] Tubes in Spice ?   Michael Buchstaller
  • [sdiy] Tubes in Spice ?   Malcolm B. McIntosh
    • [sdiy] Tubes in Spice ?   Michael Buchstaller
      • [sdiy] Tubes in Spice ?   Michael Buchstaller
• [sdiy] Methods for Analogue Synth Mods   JP
  • [sdiy] Methods for Analogue Synth Mods   Chris Crosskey
    • [sdiy] Methods for Analogue Synth Mods   Moho Disco
      • [sdiy] Methods for Analogue Synth Mods   The Proteus
      • [sdiy] Methods for Analogue Synth Mods   Scott Bernardi
    • [sdiy] replacing step incrementor/decrementor with continuous pot   Plutonique9
      • [sdiy] replacing step incrementor/decrementor with continuous pot   Rob
      • [sdiy] replacing step incrementor/decrementor with continuous pot   Happy Harry
      • [sdiy] replacing step incrementor/decrementor with continuous pot   Marc Bareille
      • [sdiy] replacing step incrementor/decrementor with continuous pot   Happy Harry
      • [sdiy] replacing step incrementor/decrementor with continuous pot   Synthusiast
      • [sdiy] replacing step incrementor/decrementor with continuous pot   Emmanuel AMADIO
      • [sdiy] replacing step incrementor/decrementor with continuous pot   Christian Hofmann
      • [sdiy] replacing step incrementor/decrementor with continuous pot   Rob
      • [sdiy] replacing step incrementor/decrementor with continuous pot   Paul Maddox
      • [sdiy] replacing step incrementor/decrementor with continuous pot   Ingo Debus
  • [sdiy] Methods for Analogue Synth Mods   Plutonique9
    • [sdiy] Methods for Analogue Synth Mods   JP
      • [sdiy] "Ghost" Electronics   Grant Richter
      • [sdiy] "Ghost" Electronics   Happy Harry
      • [sdiy] "Ghost" Electronics   Thomas Hudson
      • [sdiy] "Ghost" Electronics   Crystal
      • [sdiy] "Ghost" Electronics   Terry Michaels
      • [sdiy] "Ghost" Electronics   Grant Richter
      • [sdiy] "Ghost" Electronics   Edu Silva
      • [sdiy] "Ghost" Electronics   Chris Crosskey
      • [sdiy] "Ghost" Electronics   Terry Michaels
      • [sdiy] "Ghost" Electronics   Grant Richter
      • [sdiy] "Ghost" Electronics   Martin Czech
      • [sdiy] "Ghost" Electronics   Grant Richter
      • [sdiy] "Ghost" Electronics   Matti
  • [sdiy] Methods for Analogue Synth Mods   Happy Harry
• [sdiy] Vocoders...   Roel Das
  • [sdiy] Vocoders...   Kyn Si
• [sdiy] Pots   Mark Melvin
  • [sdiy] Pots   vitreousflux
• [sdiy] RAM tester and EPROM burner...   Chris Crosskey
  • [sdiy] RAM tester and EPROM burner...   Paul Maddox
    • [sdiy] RAM tester and EPROM burner...   KA4HJH
      • [sdiy] RAM tester and EPROM burner...   Paul Maddox
  • [sdiy] RAM tester and EPROM burner...   Chris Crosskey
  • [sdiy] RAM tester and EPROM burner...   sasami at blaze.net.au
  • [sdiy] RAM tester and EPROM burner...   Terry Michaels
• [sdiy] spring reverb and pots   Nicholas Pelkey
  • [sdiy] spring reverb and pots   Tony Clark
  • [sdiy] spring reverb and pots   Chris Crosskey
  • [sdiy] spring reverb and pots   Marc Bareille
  • [sdiy] spring reverb and pots   Tom May
    • [sdiy] spring reverb and pots   Jim Johnson
• [sdiy] ASM-1 Question   jdec at mindspring.com
  • [sdiy] ASM-1 Question CLARIFIED   BrightBoy
• [sdiy] small mixer circuits (or other small circuits)   Mountain Man
  • [sdiy] small mixer circuits (or other small circuits)   pH_________
• [sdiy] OT? : Insert connectors   Theo
  • [sdiy] OT? : Insert connectors   Tony Allgood
  • [sdiy] OT? : Insert connectors   Edu Silva
  • [sdiy] Re: OT? : Insert connectors   Theo
  • [sdiy] Re: OT? : Insert connectors   Happy Harry
    • [sdiy] Insert connectors   Tony Allgood
      • [sdiy] Insert connectors   Happy Harry
      • [sdiy] Insert connectors   Tony Allgood
• [sdiy] Anyone own/use an E&MM SPECTRUM SYNTH   Richard
• [sdiy] CS-synthesizer page update   jh.
• [sdiy] Online o-scope info at Circuit Cellar   Toby Paddock
• [sdiy] OP291 op-amp   tpaddock at seanet.com
  • [sdiy] OP291 op-amp   Tony Clark
• [sdiy] EFM Stuff   tomg at efm
• [sdiy] ic replacement???   Dean Stiglitz
• [sdiy] uPD650C datasheets   Andreas H
• [sdiy] SAD-1024 delay line   Aurora PPGsynth
  • [sdiy] SAD-1024 delay line   patchell
  • [sdiy] SAD-1024 delay line   KA4HJH
    • [sdiy] SAD-1024 delay line   Glen
      • [sdiy] Interesting :)   Budweiser
      • [sdiy] SAD-1024 delay line   KA4HJH
      • [sdiy] SAD-1024 delay line   Tony Allgood
      • [sdiy] SAD-1024 delay line   John Blacet
  • [sdiy] SAD-1024 delay line   Happy Harry
  • [sdiy] SAD-1024 delay line   Fahl, Romeo
    • [sdiy] SAD-1024 delay line   jbv
  • [sdiy] SAD-1024 delay line   Aurora PPGsynth
• [sdiy] FYI: 10-turn pot resolution....   Nick Zuccaro
• [sdiy] Patch Routing Idea...   Scott Evans, Gen Mgr
• [sdiy] New batches of vintage Roland parts?   Synthusiast
• [sdiy] Toggle Switch wanted   Keith Winstanley
  • [sdiy] Toggle Switch wanted   Tony Allgood
  • [sdiy] Toggle Switch wanted   Keith Winstanley
    • [sdiy] Toggle Switch wanted   jh.
  • [sdiy] Toggle Switch wanted   Keith Winstanley
• [sdiy] midi controller DIY'ing   plons at gmx.co.uk
  • [sdiy] midi controller DIY'ing   John Blacet
  • [sdiy] midi controller DIY'ing   unlyrn
  • [sdiy] midi controller DIY'ing   Thorsten.Klose at gmx.de
  • AW: [sdiy] midi controller DIY'ing   Jozka Neduchal
  • SV: [sdiy] midi controller DIY'ing   Andreas H
    • [sdiy] midi controller DIY'ing   Tony Allgood
      • [sdiy] midi controller DIY'ing   Paul Maddox
    • SV: [sdiy] midi controller DIY'ing   sarth at sarth.net
  • [sdiy] midi controller DIY'ing   WeAreAs1 at aol.com
    • [sdiy] midi controller DIY'ing   JP
  • [sdiy] midi controller DIY'ing   WeAreAs1 at aol.com
    • [sdiy] midi controller DIY'ing   JP
  • [sdiy] midi controller DIY'ing   david leigh
    • [sdiy] midi controller DIY'ing   Matti
• [sdiy] lab stuff   Martin Czech
  • [sdiy] lab stuff   J. Larry Hendry
    • [sdiy] lab stuff   KA4HJH
  • [sdiy] lab stuff   Happy Harry
    • [sdiy] lab stuff   Tony Clark
  • [sdiy] lab stuff   Ingo Debus
• [sdiy] TAM drum module schematics online. (TS-305/306)   Florian Anwander
  • [sdiy] TAM drum module schematics online. (TS-305/306)   Peter Snow
• [sdiy] Korg Delta VCF schematics?   Fahl, Romeo
• [sdiy] Nintendo Power Glove Theremin   Jon Darby
  • [sdiy] Nintendo Power Glove Theremin   Nicholas Pelkey
  • [sdiy] Nintendo Power Glove Theremin   Florian Anwander
    • [sdiy] Nintendo Power Glove Theremin   Ingo Debus
• [sdiy] OT: LION; new Linux BIND worm...   Drew Smith
• [sdiy] Sprint PCS Samsung..... AT+T Nokia any diy synth ideas?   Nicholas Pelkey
• [sdiy] convolution C source available   Martin Czech
• [sdiy] [OT] cdplayer noise   alan.p at clear.net.nz
  • [sdiy] [OT] cdplayer noise   Roel Das
    • [sdiy] [OT] cdplayer noise   Stefano Costa
      • [sdiy] [OT] cdplayer noise   Scott Evans, Gen Mgr
    • [sdiy] [OT] cdplayer noise   Edu Silva
• [sdiy] Power Issues   Moho Disco
  • [sdiy] the beauty and the shame...   Ken MacBeth
    • [sdiy] the beauty and the shame...   tomg at efm
      • [sdiy] the beauty and the shame...   harry
      • [sdiy] the beauty and the shame...   deknow at deknow.com
      • [sdiy] the beauty and the shame...   CHoaglin at aol.com
      • [sdiy] the beauty and the shame...   Rob
  • [sdiy] Power Issues   Tony Allgood
• [sdiy] International 3600 & 4600   Default Jamerson
  • [sdiy] International 3600 & 4600   tomg at efm
  • [sdiy] International 3600 & 4600   Torbjörn Hörnfeldt
  • [sdiy] International 3600 & 4600   Ken Stone
• [sdiy] Thank you guys (male and female)   Dave Krooshof
• [sdiy] Docs needed for MSB-512   Martin Gustafsson
• [sdiy] DAC   Dave Krooshof
• [sdiy] nokia and samsung....no ideas?   Nicholas Pelkey
  • [sdiy] nokia and samsung....no ideas?   Buck Buchanan
  • [sdiy] nokia and samsung....no ideas?   Rob
• [sdiy] simple lfo circuit ?   Mountain Man
  • [sdiy] simple lfo circuit ?   Scott Bernardi
  • [sdiy] simple lfo circuit ?   Magnus Danielson
  • [sdiy] simple lfo circuit ?   Mountain Man
    • [sdiy] simple lfo circuit ?   Tom May
      • [sdiy] simple lfo circuit ?   Mountain Man
      • [sdiy] simple lfo circuit ?   patchell
    • [sdiy] simple lfo circuit ?   Magnus Danielson
• [sdiy] frac panels ?   Mountain Man
• [sdiy] Electronics 101   JP
  • [sdiy] DIYers in Wisconsin area   Grant Richter
• [sdiy] Moog 901A questions   Turner Wallace
  • [sdiy] Moog 901A questions   Terry Michaels
  • [sdiy] Moog 901A questions   Turner Wallace
  • [sdiy] Moog 901A questions   Terry Michaels
• [sdiy] vintage synths gallery   riccardo
  • [sdiy] vintage synths gallery   Tony Allgood
• [sdiy] Photos of modified TR606 online   VINTVOLT
  • [sdiy] Oberheim OB-X ROMs   Richard Atkinson
  • [sdiy] drum mods and plate reverb??   xoxos
    • [sdiy] drum mods and plate reverb??   Reverend djbluE (Chromatest)
      • [sdiy] drum mods and plate reverb??   Ingo Debus
      • [sdiy] drum mods and plate reverb??   Sebastian Kuehnl
      • [sdiy] drum mods and plate reverb??   Reverend djbluE (Chromatest)
      • [sdiy] drum mods and plate reverb??   jh.
      • [sdiy] drum mods and plate reverb??   Ingo Debus
• [sdiy] soft PSU turn on circuit needed   Martin Czech
  • [sdiy] soft PSU turn on circuit needed   Neil Johnson
    • [sdiy] soft PSU turn on circuit needed   harry
      • [sdiy] soft PSU turn on circuit needed   Martin Czech
      • [sdiy] soft PSU turn on circuit needed   Martin Czech
• [sdiy] Plastic case fabrication   Jon Darby
  • [sdiy] Plastic case fabrication   David Halliday
    • [sdiy] Plastic case fabrication   Rob
  • [sdiy] Plastic case fabrication   Happy Harry
  • [sdiy] Plastic case fabrication   Chris Crosskey
  • [sdiy] Plastic case fabrication   Chris Randall
  • [sdiy] Plastic case fabrication   Tony Clark
    • [sdiy] Plastic case fabrication   Rob
• [sdiy] PCBs from printouts   Paul Maddox
  • [sdiy] PCBs from printouts   The Old Crow
  • [sdiy] PCBs from printouts   Grant Richter
    • [sdiy] PCBs from printouts   Neil Johnson
    • [sdiy] PCBs from printouts   jbv
      • [sdiy] PCBs from printouts   Paul Maddox
      • [sdiy] #3 Standard WoggleBug   Grant Richter
      • [sdiy] #3 Standard WoggleBug   Grant Richter
      • [sdiy] #3 Standard WoggleBug   tomg at efm
      • [sdiy] Synthi A project   steven_thomas
      • [sdiy] Synthi A project   patchell
      • [sdiy] Synthi A project   Chris Crosskey
      • [sdiy] Synthi A project   steven_thomas
      • [sdiy] Synthi A project   Mountain Man
      • [sdiy] Synthi A project/amean machine!   Ken MacBeth
      • [sdiy] Synthi A project/amean machine!   Reverend djbluE (Chromatest)
      • [sdiy] Synthi A project   Paul Maddox
      • [sdiy] #3 Standard WoggleBug   Happy Harry
      • [sdiy] New (maybe old?) Circuit Bending technique   Grant Richter
      • [sdiy] #3 Standard WoggleBug   tomg at efm
  • [sdiy] PCBs from printouts   Jim Patchell
    • [sdiy] PCBs from printouts   Hugo Haesaert
  • [sdiy] PCBs from printouts   Happy Harry
  • [sdiy] PCBs from printouts   Paul Perry
• [sdiy] Spring Reverb   rob
  • [sdiy] Spring Reverb   The Peasant
• [sdiy] test   Benjamin Smith
• [sdiy] using +/-15V supply with +/-12V gear   matt wilson
  • [sdiy] using +/-15V supply with +/-12V gear   harry
  • [sdiy] using +/-15V supply with +/-12V gear   jh.
    • [sdiy] using +/-15V supply with +/-12V gear   Edu Silva
      • [sdiy] using +/-15V supply with +/-12V gear   jh.
      • [sdiy] using +/-15V supply with +/-12V gear   harry
      • [sdiy] using +/-15V supply with +/-12V gear   Michael Buchstaller
      • [sdiy] using +/-15V supply with +/-12V gear   John Blacet
    • [sdiy] using +/-15V supply with +/-12V gear   matt wilson
• [sdiy] pcb / circuit layout software   Mountain Man
  • [sdiy] pcb / circuit layout software   harry
    • [sdiy] pcb / circuit layout software   Mountain Man
      • [sdiy] pcb / circuit layout software   Chris MacDonald
      • [sdiy] pcb / circuit layout software   Theo
      • [sdiy] pcb / circuit layout software   Chris MacDonald
• [sdiy] Need help testing 6N138   paul
• [sdiy] expo converter   Benjamin Smith
  • [sdiy] expo converter   Scott Bernardi
    • [sdiy] expo converter   Scott Bernardi
      • [sdiy] expo converter   tomg at efm
      • [sdiy] expo converter   Emmanuel AMADIO
      • [sdiy] expo converter   Jim Patchell
      • [sdiy] expo converter   René Schmitz
      • [sdiy] expo converter   tomg at efm
• [sdiy] Chip ID   Benjamin Smith
  • [sdiy] Chip ID   harry
    • [sdiy] Chip ID   Roel Das
  • [sdiy] Chip ID   Magnus Danielson
  • [sdiy] Chip ID   Paul Perry
    • [sdiy] Chip ID   Florian Anwander
• [sdiy] Schematic Capture & Layout Special!   Tony Clark
  • [sdiy] Schematic Capture & Layout Special!   Theo
• [sdiy] Acrylic coating on PCBs   Trevor Page
  • [sdiy] Acrylic coating on PCBs   Happy Harry
  • [sdiy] Acrylic coating on PCBs   Tony Clark
  • [sdiy] Acrylic coating on PCBs   sasami at blaze.net.au
    • [sdiy] Acrylic coating on PCBs   Theo
• [sdiy] Schematic Capture & Layout Special! (fwd)   Tony Clark
• Fw: [sdiy] pcb / circuit layout software   Theo
• [sdiy] Fw: Public Electronics Circuit Archive   JP
  • [sdiy] Fw: Public Electronics Circuit Archive   Scott Gravenhorst
  • [sdiy] Fw: Public Electronics Circuit Archive   Don Tillman
    • [sdiy] Fw: Public Electronics Circuit Archive   Tony Clark
    • [sdiy] Fw: Public Electronics Circuit Archive   Magnus Danielson
      • [sdiy] Fw: Public Electronics Circuit Archive   KA4HJH
  • [sdiy] Fw: Public Electronics Circuit Archive   CHoaglin at aol.com
  • [sdiy] Fw: Public Electronics Circuit Archive   Chris Crosskey
• [sdiy] Whirly-Whirler LFO   Toby Paddock
  • [sdiy] Env. Controlled 606 filter sweep methods?   Plutonique9
    • [sdiy] Env. Controlled 606 filter sweep methods?   Happy Harry
• [sdiy] Basic Diode Question   vitreousflux
  • [sdiy] Basic Diode Question   WeAreAs1 at aol.com
• [sdiy] Toggle Swith Question   Reverend djbluE (Chromatest)
• [sdiy] [OT]Mixer panel malfunction   Jeroen Proveniers
• [sdiy] EFM RXCV-Pro & 16F84 Pic Microcontroller Question - Please help!   vitreousflux
  • [sdiy] EFM RXCV-Pro & 16F84 Pic Microcontroller Question - Please help!   Trevor Page
    • [sdiy] EFM RXCV-Pro & 16F84 Pic Microcontroller Question - Please help!   tomg at efm
• [sdiy] How to use DRAM ?   Michael Buchstaller
  • [sdiy] How to use DRAM ?   Anderson, Robert O
    • [sdiy] 3280 VCA question   Kenneth Martinez
      • [sdiy] 3280 VCA question   The Old Crow
      • [sdiy] 3280 VCA question   Kenneth Martinez
      • [sdiy] 3280 VCA question   Jim Patchell
      • [sdiy] 3280 VCA question   Jim Patchell
  • [sdiy] How to use DRAM ?   Jim Patchell
  • [sdiy] How to use DRAM ?   sasami at blaze.net.au
    • [sdiy] How to use DRAM ?   Michael Buchstaller
  • [sdiy] How to use DRAM ?   paul van bavel
  • [sdiy] How to use DRAM ?   René Schmitz
• [sdiy] Making a SCSI switcher   david
  • [sdiy] Making a SCSI switcher   Magnus Danielson
• [sdiy] expo converter....clues for the sleuths   Benjamin Smith
  • [sdiy] expo converter....clues for the sleuths   harry
• [sdiy] Re: plate reverb??   pelagius pelagius
  • [sdiy] Re: plate reverb??   harry
    • [sdiy] Re: plate reverb??   Happy Harry
  • [sdiy] Re: plate reverb??   Ingo Debus
• [sdiy] line levels   trip at blackstar.myip.org
• [sdiy] Oberheim Matrix 6R volume pedal help   David Brown
• [sdiy] 11mm vertical pots 1meg log ?   jh.
• [sdiy] CV Sequencer question   HUGH DUFFY
• [sdiy] Wow, what a site!   Lincoln Fong
  • [sdiy] PCB Layout terminology   Mountain Man
    • [sdiy] PCB Layout terminology   Happy Harry
    • [sdiy] PCB Layout terminology   Tony Clark
• [sdiy] Attn: DIYers in SW usa...   CasioRZ1 at aol.com
• [sdiy] simple lfo circuit ?]   Mountain Man
• [sdiy] PCB layout and printing   Brett, Bill
• [sdiy] Fwd: MIDI spec / implementation question   Frank Lemieux
  • [sdiy] Fwd: MIDI spec / implementation question   The Old Crow
• [sdiy] Conductive paint and PCBs   Trevor Page
• [sdiy] PCB for mac osx?   Kyn Si
• [sdiy] one switch per key   DCMagnuson at aol.com
  • [sdiy] one switch per key   tomg at efm
  • [sdiy] one switch per key   DCMagnuson at aol.com
• [sdiy] Thomas Organ schematic links?   DCMagnuson at aol.com
• [sdiy] 3-phase Whirly-Whirler LFO   Toby Paddock
• [sdiy] synthi A webpage update   S.Thomas
  • [sdiy] synthi A webpage update   jh.
    • [sdiy] synthi A webpage update   Tony Clark
  • [sdiy] synthi A webpage update   Budweiser
  • [sdiy] synthi A webpage update   CHoaglin at aol.com
  • [sdiy] synthi A webpage update   Paul Maddox
    • [sdiy] synthi A webpage update   patchell
  • [sdiy] synthi A webpage update   patchell
• [sdiy] filter problem   robbie robot
  • [sdiy] filter problem   Happy Harry
• [sdiy] Korg MS-50 service manual   joe.pavone
  • [sdiy] Korg MS-50 service manual   >>>marjan<<<
• [sdiy] ADSRs   Alex Dickey
  • [sdiy] ADSRs   Alex Dickey
• [sdiy] (OT) Computer clock losing time...   Reverend djbluE (Chromatest)
• [sdiy] resistor question,   ElmacacoX at aol.com
• Fw: [sdiy] synthi A webpage update   Gert Jalass
• [sdiy] temp comp   Ken Stone

Last message date: Sat Mar 31 23:54:46 CEST 2001
Archived on: Fri Apr 1 12:56:13 CEST 2022

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...